Related Manuals for Samsung HW-S80CB
Summary of Contents for Samsung HW-S80CB
- Page 1 FULL MANUAL HW-S800B / HW-S801B / HW-S80CB Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register...
- Page 2 Dispose unwanted electronics through an approved recycler. To find plug out of the wall socket. Consequently, the power plug must be the nearest recycling location, go to our website:www.samsung.com/ easily and readily accessible at all times. recycling Or call, 1‐800‐SAMSUNG FCC NOTE (for U.S.A):...
- Page 3 13. Unplug this apparatus during lightning storms or when unused for the Samsung service center. long periods of time. • Do not arbitrarily disassemble the remote control. 14. Refer all servicing to qualified service personnel. Servicing is •...
-
Page 4: Table Of Contents
CONTENTS Checking the Components Product Overview Top Panel of the Soundbar..................... .7 Rear Panel of the Soundbar . - Page 5 Troubleshooting License Open Source License Notice Important Notes About Service Specifications and Guide Specifications ....................... 36 ENG - 5...
-
Page 6: Checking The Components
• For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit) • To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care. • For more information about the wallmount or rubber-foot, see pages 28~29. -
Page 7: Product Overview
02 PRODUCT OVERVIEW Top Panel of the Soundbar LED indicator The LED Indicator flashes, glows, or changes color depending on the Soundbar’s current mode or status. The color of the LED indicator and the number of lights indicate the active mode as described below. White LED White LED Multicolor LED... -
Page 8: Rear Panel Of The Soundbar
Rear Panel of the Soundbar SERVICE SERVICE DC 19V DC 19V HDMI HDMI (ARC) (ARC) SERVICE HDMI DC 19V (ARC) SERVICE Connect a USB storage device to upgrade the product’s software. HDMI (ARC) Connect to the HDMI (ARC) port on a TV. (See page 17) SERVICE DC 19V DC 19V... -
Page 9: Using The Soundbar Remote Control
03 USING THE SOUNDBAR REMOTE CONTROL About the Remote control • Use the Remote less than 6 m from the product. The usable distance may vary with the wireless environmental conditions. • When the remote control does not work due to low battery, charge it by using the USB-C type port. •... - Page 10 Press the button to display information about the current function. (See page 7) When connected to Dolby Atmos®, the LED indicator blinks cyan 3 times. Info By pressing the button, you can select the desired audio mode. Each time the mode changes, the Multicolor LED blinks in white.
-
Page 11: Active Voice Amplifier (Ava)
By pressing the button, you can adjust the volume of the treble or bass sound. The defired item can be adjusted using the Up/Down buttons. This function is enabled in Sound mode excluding in Standard mode. TONE CONTROL • To control the volume of the treble or bass sound, select “Treble” or “Bass” in Sound Settings, and then adjust the volume between -6~+6 by using the Up/Down buttons. -
Page 12: Output Specifications For The Different Sound Effect Modes
3.1.2 ch 5.1.4 ch • The Samsung Wireless Rear Speaker Kit can be purchased separately. To purchase a Kit, contact the vendor you purchases the Soundbar from. • The Surround Speakers will not produce sounds for 2 channel output while STANDARD mode is in use. To enable sound for the Surround Speakers, change the effect mode to SURROUND. -
Page 13: Adjusting The Soundbar Volume With A Tv Remote Control
• Set the TV speaker to External Speaker to use this function. • Manufacturers supporting this function: Samsung, VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA 1. Turn Off the Soundbar. 2. Push up and hold the WOOFER button for 5 seconds. -
Page 14: Connecting The Soundbar
04 CONNECTING THE SOUNDBAR Connecting the power and units Use the Power cord to connect the Subwoofer and Soundbar to an electrical outlet in the following order: • For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit) 1. -
Page 15: Manually Connecting The Subwoofer
Manually connecting the Subwoofer Before performing the manual connection procedure below: • Check whether the power cables for the Soundbar and subwoofer is connected properly. • Make sure that the Soundbar is turned off. 1. Turn off the Soundbar main. 2. -
Page 16: Led Indicator Lights On The Rear Of Subwoofer
Connecting an SWA-9500S (Sold Separately) to your Soundbar Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-9500S, sold separately) to your Soundbar. For detailed information on connections, see the Samsung Wireless Rear Speaker Kit manual. -
Page 17: Connecting To A Tv
05 CONNECTING TO A TV Connecting the TV that supports HDMI ARC (Audio Return Channel) CAUTION • When using an HDMI to Micro HDMI cable, take caution not to break the cable terminal. • When the HDMI cable is connected, the HDMI signal is received first. •... -
Page 18: Connecting Via Bluetooth
3. Select “Ultra Slim Soundbar” from the list on TV’s screen. An available Soundbar is indicated with “Need Pairing” or “Paired” on the TV’s Bluetooth device list. To connect the Samsung TV to the Soundbar, select the message, and then establish a connection. -
Page 19: Connecting Via Wi-Fi
Connecting via Wi-Fi Pre-connection Checklist • Wi-Fi connection is available only on Samsung TV. • Check whether the wireless router (Wi-Fi) is turned on and the TV is connected to the router. • The TV and Soundbar must be connected to the same wireless network (Wi-Fi). -
Page 20: Connecting To A Tv That Supports Dolby Atmos
Open the audio output options on the settings menu of your BD player or other device and make sure that “No Encoding” is selected for Bitstream. For example, on a Samsung BD Player, go to Home Menu → Sound → Digital Output and then select Bitstream (unprocessed). -
Page 21: Using The Q-Symphony Function
Using the Q-Symphony Function For Q-Symphony, the Soundbar syncs with a Samsung TV to output sound through two devices for optimum surround effect. When the Soundbar is connected, the menu, “TV+Soundbar” appears under the Sound Output menu of the TV. Select the corresponding menu. -
Page 22: Using The Spacefit Sound
( Up ) → “SpaceFit Sound On”) • This is available in all Sound modes. Method 2. Connecting via TV To enable this function, turn on the Adaptive Sound+ mode on your Samsung TV menu. (Home ( ) → Menu → Settings ( ) →... -
Page 23: Connecting A Mobile Device
06 CONNECTING A MOBILE DEVICE Method 1. Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. • When you connect a paired Bluetooth device with the Soundbar off, the Soundbar automatically turns on. - Page 24 • A Bluetooth device may experience noise or malfunction under in the following conditions: ‒ When the body is in contact with the signal transceiver on the Bluetooth device or Soundbar ‒ In corners or when there is an obstacle in proximity, such as a wall or partition, where electrical changes may occur. ‒...
-
Page 25: Method 2. Connecting Via Wi-Fi (Wireless Network)
Method 2. Connecting via Wi-Fi (Wireless Network) To connect a Soundbar to a mobile device via a wireless network (Wi-Fi), the SmartThings app is required. The initial connection 1. Install and launch the SmartThings app from your mobile device (smartphone or tablet). 2. -
Page 26: Using The Tap Sound
Tap the Soundbar with your mobile device to play the sound of content on the mobile device through the Soundbar. • This function may not be supported, depending on the mobile device. • This function is only compatible with Samsung mobile devices with Android 8.1 or later. SmartThings App... -
Page 27: Connecting Via Apple Airplay
• This Samsung Soundbar supports AirPlay 2 and requires iOS 11.4 or later. With AirPlay 2, you can stream music, podcasts, and other audio from your Apple devices to the Samsung Soundbar. • Make sure the Soundbar is powered on and connected to the same Wi-Fi network as your Apple device. -
Page 28: Installing The Wall Mount
08 INSTALLING THE WALL 2. Align the Wall Mount Guide’s Center Line with the center of your TV (if you are mounting the Soundbar below your TV), and then fix MOUNT the Wall Mount Guide to the wall using tape. •... -
Page 29: Installing The Soundbar In Front Of Tv
09 INSTALLING THE 6. Install the 2 Bracket-Wall Mounts in the correct orientation on the rear of the Soundbar using 2 Holder-screws. SOUNDBAR IN FRONT OF • When assembling, make sure the hanger part of the Bracket- Wall Mounts are located behind the rear of the Soundbar. Rear of Soundbar Right end of Soundbar Microphones... -
Page 30: Installing The Ultra Slim Soundbar Skin
• This product is only for use with the Samsung Soundbar HW-S800B/S801B/S80CB. • This product is a part attached to the exterior of the Samsung Soundbar HW-S800B/S801B/S80CB. • C, D, E, F, and G are parts for wall mounting included in the HW-S800B/S801B/S80CB product. They are not provided with this product. - Page 31 ENG - 31...
-
Page 32: Software Update
USB drive that contains the update firmware to the indicator Cyan Blinks X3 SERVICE port of the Soundbar. 1. Go to (www.samsung.com) → search for the model name from the customer support menu option. • For more information about update, refer to Upgrade Guide. Red Blinks → Off 2. -
Page 33: Troubleshooting
• Your device is unable to play the input signal. Change the TV’s • For sound output of the TV, select Soundbar. (Samsung TV: audio output to PCM or Dolby Digital. (For a Samsung TV: Home ( ) →... -
Page 34: License
12 LICENSE Sound drops out when connected via Bluetooth. • Some devices can cause radio interference if they are located too close to the Soundbar. e. g. microwaves, wireless routers, etc. • If your device that is connected via Bluetooth moves too far away from the soundbar, it may cause the sound to drop out. -
Page 35: Open Source License Notice
• The product can wake with a button press on the chassis from sleep mode. ENERGY STAR qualified model only (The other models) • As an ENERGY STAR Partner, Samsung has determined that this product or product models meets the ENERGY STAR guideline for energy efficiency. -
Page 36: Specifications And Guide
Rated Output power 200 W NOTE • Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. • Weight and dimensions are approximate. Precaution : The Soundbar will restart automatically if you turn on/turn off Wi-Fi. Press and hold the CH LEVEL button on the remote control of the Soundbar for more To deactivate Wi-Fi connection: than 30 seconds to turn on or off the Wi-Fi connection. - Page 37 SAMSUNG or SAMSUNG’s authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
- Page 38 QUESTIONS OR COMMENTS? Country Samsung Service Center Web Site Address Samsung Electronics America, Inc. IN THE US 1-800-SAMSUNG (726-7864) www.samsung.com/us/support 85 Challenger Road Ridgefield Park, NJ 07660 © 2022 Samsung Electronics Co., Ltd. All rights reserved.