TOOLCRAFT LDM 70 P Operating Instructions Manual page 47

Laser distance meter

Table of Contents

Available languages

2. Now measure both necessary distances. For the correct order,

see the following illustration or follow the flashing segments of the

indicator for indirect measurement.

3. Activate the target laser (B) by pushing the button ON (C).

4. Push the button ON to measure the first side length. The

measurement is shown in the upper line.

5. Activate the target laser by pushing the button ON.

6. Push the button ON to measure the second side length. The second

side length is measured continuously. The minimum measurement

is shown in the middle line, the real-time measurement is shown

in the bottom line.

7. Push the button ON to register the minimum measurement of the

second side length. The height is calculated automatically and is

shown in the bottom line.

Table of Contents

Chapters

Table of Contents

Do you have a question about the LDM 70 P and is the answer not in the manual?