Pioneer PRO-110FD Service Manual page 53

5
Remote Control Unit
This section describes the functions of the buttons available
when the mode switch has been set to TV.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Mode switch
(with "TV" selected)
5
6
1 TV
into standby mode.
2 Transmission confirmation LED
3 INPUT: Selects an input source of the plasma display.
("INPUT1", "INPUT 2 ", "INPUT3", "INPUT4", "INPUT5",
"INPUT6" and "INPUT 7 ")
4 SCREEN SIZE: Selects the screen size.
5 AV SELECTION: Selects audio and video settings. (AV source:
OPTIMUM, STANDARD, DYNAMIC, MOVIE, GAME, USER.
18
PC source: STANDARD, USER.)
6 INFO: Displays a channel banner when a TV program is being
19
watched.
When the TV Guide On Screen™ system is in operation, displays
20
information about the currently highlighted channel (if available).
7 HOME MENU: Displays the HOME MENU screen.
21
MENU: Displays a panel menu when the TV Guide On Screen™
22
system is in operation.
8 DAY +/–: Jumps to the next or previous day of program listings
in the TV Guide On Screen™ Listing service.
23
9 /
10 HDMI CONTROL: Displays the HDMI Control menu.
11 FAVORITE CH (A, B, C, D):
Selects any of the four preset channels.
24
While watching, you can toggle the set channels by pressing A,
B, C and D.
12 0 to 9: Selects the channel.
13 • (dot): Enters a dot.
14 CH +/–: Selects the channel.
15 SPLIT: Switches the screen mode among 2-screen, picture-in-
picture, and single-screen.
16 FREEZE: Freezes a frame from a moving image. Press again to
cancel the function.
17 MTS: Selects MTS/SAP or language depending on the program
being watched.
18 ANT: Selects the antenna (A, B).
25
19 PC: Selects the PC terminal as an input source.
20 DISPLAY: Displays the channel information.
26
21 TV GUIDE: Displays the TV Guide On Screen™ system.
22 ENTER: Executes a command.
27
23 PAGE +/– (for the TV Guide On Screen™ system): Scrolls the
program listing screen vertically.
24 RETURN: Returns to the previous menu screen.
28
25 CH ENTER: Executes a channel number.
26 CH RETURN: Returns to the previous channel. This button is
disabled while the TV Guide On Screen™ system is displayed.
27 VOL +/–: Sets the volume.
28 MUTING: Mutes the sound.
29
29 SHIFT: Moves the location of the small screen when in the
picture-in-picture mode.
30
30 SWAP: Switches between the two screens when in the 2-screen
or picture-in-picture mode.
Luminous remote control buttons
All buttons on the remote control unit are luminous and gather
and store light. This enables quick access to the desired
function when performing operations in dark places.
Note
• When using the remote control unit, point it at the plasma
display.
PDP-5010FD
6
7
: Turns on the power to the plasma display or places it
/ / : Selects a desired item on the menu screen.
7
8
A
B
C
D
E
F
13
8