Control Panel Quick Reference Guide - BOSSLASER HP Series Operator's Manual

Control Panel Functions

Control Panel Quick Reference Guide

We will go into depth about the functions and settings available on the control panel later in the manual. This reference
guide is to be used as a table of contents for your control panel, so you can quickly and easily find the parameter you're
trying to change or view.
"More" Button
 "Ins" Menu
 X-, Y-, X+, Y+, Z-, U-, Z+, U+, V-, W-, V+, W+,
IN1, IN2, IN3, IN4, IN5, IN6, WP1, WP2, WP3,
WP4 Options.
 "Outs" Menu
 Outs, Out1, Out2, Out3, Out4, Out5, Out6,
Out7, Out8 Options.
 "Cut Box" Menu
 Blank Distance (mm) Option
 "Reset" Menu
 U Reset
 V Reset
 W Reset
 X&Y Reset
 Z Reset
 "Move" Menu
 Jog Distance
 U-Axis Up
 U-Axis Down
 Z-Axis Up
 Z-Axis Down
 Speed of Laser Head Adjustment
 Menu Change
 X-Axis Left
 X-Axis Right
 Y-Axis Up
 Y-Axis Down
 "Other" Menu
 Z AutoFocus
 X&Y to Origin
 Continue to Previous Work
Document Number: QM-855-902
"Menu" Button
Revision Date: 05/17/2023
 UDisk Files
 Origin Manage
 Origin 1, 2, 3, 4
 The origin'PX(mm)
 The origin'PY(mm)
 Set Current Position as the origin
 Move head to the origin
 Motion Parameter Settings
 Space Speed
 Cut Jerk
 Space Jerk
 Min Acc
 Engrave Acc
 Common Parameter Settings
 Work Mode
 Go Origin After Reset
 Origin Mode
 GoBack Position
 Count Mode
 Feeding Mode
 Common Parameters
 AutoFocus Distance (mm)
 KeyMove'Speed
 RunBox'Speed
 CutBox'Speed
 Blow Open Delay(s)
 Axis Speed Parameters
 Z Work Speed
 U Work Speed
 XY Home Speed
 Z Home Speed
 U Home Speed
 Rotate Engraving&Cutting
 Rotary Disable/Enable
 Rotary Axis
 Type of Rotary
 Pulse Count Per Rotate
 Current Diameter (mm)
 Cutting Follow
 Cutting Follow Enable/Disable
 Down Delay(s)
 Up Delay(s)
 Drilling Power(%)
 Drilling Total Time(s)
 Manufacturer Parameter Settings
Revision Number: 004 Page 36 of 85