Low voltage landscape lighting, rgbcw or cw rf spot light (16 pages)
Summary of Contents for Volt VAL-180
Page 1
INSTALLATION INSTRUCTIONS VOLT LOW VOLTAGE LANDSCAPE LIGHTING ® VOLT® Top Dog Scotty Cast Brass Spotlight ITEM: VAL-180 1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)
Page 2
INSTALLATION INSTRUCTIONS VOLT® Top Dog Scotty Cast Brass Spotlight VAL-180 IMPORTANT: PLEASE READ BEFORE INSTALLATION This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
Page 3
PACKAGE CONTENTS A. (1) Fixture Body PRODUCT DIMENSIONS A. Mounting Accessory B. MR16 Lamp PRODUCT DIMENSIONS 2.4” 5.67” 1.0” INSTALL STAKE Determine the desired location for Board mounting the stake mount. Hammer the stake into the ground until flange of stake is flush to grade. To avoid damage to the stake, place a board on top of the stake while Stake...
Page 4
INSTALLATION INSTRUCTIONS VOLT® Top Dog Scotty Cast Brass Spotlight VAL-180 INSTALL FIXTURE BODY TO STAKE Fixture Clear away an area in the ground Body at the wireway slot on top of the stake. Lay the supply wires into the wireway slot and attach the Wireway fixture on to the stake.
Page 5
Remove Glare Guard and Lens Glare Guard Unlock the set screw and remove the glare guard from the lens. Unscrew the lens to Lens remove it from fixture. Set Screw Fixture Install MR16 Lamp Insert MR16 bulb with the cor- rect wattage and type marked MR16 Lamp on the fixture label and secure...
Page 6
INSTALLATION INSTRUCTIONS VOLT® Top Dog Scotty Cast Brass Spotlight VAL-180 Adjust Luminaire Direction Loosen the adjustment screw at ROTATE the joint and adjust the Luminaire luminaire to the desired direction. Once the desired direction is achieved, tighten the adjustment screw.
Need help?
Do you have a question about the VAL-180 and is the answer not in the manual?
Questions and answers