DISASSEMBLY- AND RE-ASSEMBLY ADVISE HD7852/50 Remove back cover. Remove brew chamber cover to reach user interface PCB. - Remove screws (T15) from the back cover. - To remove the brew chamber lid cover place the screwdriver on the positions (see picture) and lift the cover over the - Remove valve outlet.
REPAIR INSTRUCTION HD7852/50 Descaling Volume adjustment Regular descaling will prolong the life of your appliance and The PCB circuit board makes it possible to adjust the volume will guarantee optimal brewing results for a long time. output by means of pushing the one-cup and two-cup user controls.
Page 5
REPAIR INSTRUCTION HD7852/50 Service test routines. Automatic fi lling procedure: The Senseo PCB contains an automatic fi lling procedure software routine. Sensors and buttons check mode. This fi ll routine is only meant for back-up. The Senseo is equipped with a lot of sensor and push buttons. Normally the consumer has to follow the guidelines stated in the DFU.
Need help?
Do you have a question about the Senseo Latte Select HD7852/50 and is the answer not in the manual?
Questions and answers