Bissell SPOTCLEAN PROHEAT 2694 Series User Manual page 8

Pre-Treating
IMPORTANT: Check the manufacturer's tag before cleaning upholstery. "W"
or "WS" on the tag means you can use your cleaner. If tag is coded with an
"S" (with diagonal strike-through), or says "Dry Clean Only," do not proceed. If
manufacturer's tag is missing or not coded, check with your furniture dealer.
WHY PRETREAT? Cleaning effectiveness will be enhanced if you pre-treat
heavily stained or highly soiled areas.
1
Check the
manufacturer's tag
before cleaning
upholstery. "W" or
"WS" on the tag
means you can use
your machine.
3
Release the flex hose from the hose grip
bracket. Unwrap flex hose completely
from around the machine.
5
Hold the 3" Tough Stain Tool just above
the carpet or upholstery to be cleaned.
Press the trigger to mist solution over
the soiled area.
8
www.BISSELL.ca
2
Twist the Quick Release Cord Wrap
clockwise to quickly unwrap power cord.
Plug in machine and press power button
beneath the handle to turn it ON.
4
Select desired tool for spot cleaning,
Insert tool on end of hose until it
clicks into place.
6
5
Let cleaning solution set for 5 minutes
before cleaning.