Futher information and explanations are available online: Table of contents 1 Safety .......... 8 7.5 Selecting and adjusting 1.1 General information.... 8 parameters ....... 19 1.2 Intended use....... 8 7.6 Using the delay timer .... 20 1.3 Restriction on user group... 9 7.7 Saving and retrieving indi- vidual settings ...... 20 1.4 Safety instructions ...... 9...
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
Safety en 1.3 Restriction on user group This appliance can be used by persons with reduced physical, sensory or mental capabilities or a lack of experience and/or knowledge if they have been given supervision or instruction con- cerning use of the appliance in a safe way and if they understand the hazards involved.
Page 10
en Safety ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be re- placed by the manufacturer, the manufacturer's Customer Ser- vice or a similarly qualified person in order to prevent any risk. An ingress of moisture can cause an electric shock.
Page 11
Safety en ▶ Allow hot appliance parts to cool down before touching. WARNING ‒ Risk of scalding! Hot food may splash out during processing and steam can es- cape from the lid. ▶ Never exceed the maximum quantities specified. ▶ Be careful when processing hot food. ▶...
Page 12
en Safety WARNING ‒ Risk of harm to health! Soiling on surfaces may be harmful to health. ▶ Follow the cleaning instructions. ▶ Clean surfaces which come in contact with food before each use. When hard food is processed, abrasion of the plastic may occur on some components and then get into the food.
Avoiding material damage en 2 Avoiding material dam- 4 Unpacking and check- Find out here what you need to note ATTENTION! when unpacking the appliance. Improper use may cause material damage. 4.1 Contents of package Never operate the appliance ▶ After unpacking all parts, check for longer than necessary.
en Familiarising yourself with your appliance 5.2 Symbols 5 Familiarising yourself with your appliance Symbol Description Position marking on main unit 5.1 Appliance Position marking on jugs and adapter with mixing You can find an overview of the parts blade of your appliance here. → Fig.
Familiarising yourself with your appliance en Preparation programmes Sym- ¡ Display symbols ¡ Display symbols and selec- Blending programme for the tion buttons heated blender jug, To-Go blender jug and baby food Function buttons and addi- tional programmes Blend food with default or in- Only model MMBH311...
Page 16
en Familiarising yourself with your appliance Sym- Sym- Programme for the heated Prepare rice paste. blender jug and nutritional The ingredients are cooked and mixed. ¡ Heated blender jug: Heat Prepare creamy fish or ve- water or food to the de- getable soups.
first time en Overflow protection Sym- The overflow protection system pre- vents liquids boiling too hard and Display and set the speed overflowing. A sensor in the lid of the blender jug If the buttons are lit up, the detects excessive boiling and displayed values can be ad- switches the heating element off.
en operation Place the To-Go blender jug with operation 7 Basic operation the adapter with mixing blade on the main unit as shown. operation → Fig. 7.1 Using the jug Turn the To-Go blender jug with the adapter with mixing blade You can find out everything you need clockwise.
operation en Add water to the nutritional jug and 7.3 Selecting and starting the the food to the stew container. programme → Fig. Select the required programme. Place the locking cap on the stew container. MMBH3: Press "Function" button ‒ → Fig. repeatedly until the required pro- Place the stew container into the gramme symbol lights up.
en Cleaning and servicing MMBH5: Press the required To retrieve individual parameters ‒ parameter symbol. again, press and start pro- a The parameter symbol selected cessing with "Start/Pause". lights up, e.g. . Tip: You can adjust parameters for a The default value for the selected your individual programme at any parameter is shown on the display, time and save them again.
Cleaning and servicing en Clean the inside of the jugs and Put the heated blender jug to- rinse them out. gether and fit in place. Press "Clean" and start the pro- Remove stubborn dirt with the gramme with "Start/Pause". brush supplied. Only clean the jugs on the outside a The heated blender jug is cleaned and bottom with a damp cloth and...
en Recipes 9 Recipes You can find a selection of recipes specially developed for your appliance here. 9.1 Overview of recipes This overview lists the ingredients and processing steps for various recipes. Recipe Ingredients Processing Soy milk with ¡ 50 g soybeans ¡ Wash the ingredients. black rice and ¡...
Page 23
Recipes en Recipe Ingredients Processing Apple pear ¡ 150 g apples ¡ Wash and peel the fruit and remove juice the cores. ¡ 125 g pears ¡ Cut the fruit into pieces. ¡ 500 ml water ¡ Place all ingredients in the heated blender jug. ¡...
Page 24
en Recipes Recipe Ingredients Processing ¡ 400 ml water ¡ Place all ingredients in the heated blender jug. ¡ Start the "Soup / Cream soup" pro- gramme. ¡ Once the programme has finished, serve the soup.
Troubleshooting en 10 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
Page 26
en Troubleshooting Fault Cause and troubleshooting Ingredients are burn- The dry ingredients that were selected are too dry for ing. heating. Before heating, add a sufficient volume of water to ▶ dilute the ingredients. Ingredients with a high milk, starch or sugar content were selected for heating.
Page 27
Troubleshooting en Fault Cause and troubleshooting Display shows "E04". Motor or PCB faulty. Switch off the appliance. Allow the appliance and motor to cool down suffi- ciently. Start the appliance again after it has cooled down. If the message continues to appear after you have ▶...
en Transportation, storage and disposal If you contact Customer Service, you 11 Transportation, stor- will require the product number (E- Nr.) and the production number (FD) age and disposal of your appliance. The contact details for Customer Ser- 11.1 Disposing of old appli- vice can be found in the Customer Service directory at the end of the ance...
Page 46
To arrange an engineer visit, to order 任何咨詢或服務需求, 歡迎洽詢 spare parts and accessories or for 客服專線 product advice please visit www.bosch- BSH Home Appliances Private Limited home.co.uk Or call Tel.: 0344 892 8979* 台北市內湖區洲子街80號11樓 *Calls are charged at the basic rate, 11F., No.80, Zhouzi St., Neihu Dist.
Page 48
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.
Need help?
Do you have a question about the VitaPower Cook MMBH311WHK and is the answer not in the manual?
Questions and answers