Page 1
OWNER’S MANUAL 11” 10-Amp Corded Electric Tiller / Cultivator Copyright All Rights Reserved. Model TC70010-1 | SKU# 270-2453 WARNING: To reduce the risk of injury, the user must read and understand the owner‘s manual before using this product. Thank you for your purchase.
DANGER! Rotating blades. Keep hands and feet at a safe distance. DANGER! Of being hit by thrown objects. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Model TC70010-1...
Release the trigger lever and wait for the motor to cool down (approx. 15 minutes) before starting the tiller again. Model TC70010-1...
Page 5
CAUTION: The tiller/cultivator may bounce upward and/or jump forward if the tines strike extremely hard packed soil, frozen ground, or buried obstacles such as large stones, roots or stumps. Model TC70010-1...
1-800-633-1501 for assistance. possible serious personal injury. WARNING: Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. Model TC70010-1...
Page 7
Be sure to install Tines as shown in Fig 3. Tines cannot be secured if assembled in other sequence of Tine position. (Fig. 3) WARNING: Before adjusting tine assembly, disconnect power supply. Failure to heed this warning could result in serious personal injury. Model TC70010-1...
Hold the tiller/cultivator firmly while starting. The tines will pull the tiller/cultivator forward during operation. Lower the tines slowly into the ground being tilled. To stop the tiller/cultivator simply release the bail wire. Model TC70010-1...
Page 9
To simplify removal of tall grass to the incline to retain a firm, safe footing. Do not or weeds from the tine shaft, remove one or more of work on extremely steep slopes. the tines. See Tine Removal and Installation. Model TC70010-1...
Abnormal vibrations Blades damaged or worn Replace damaged or worn blades. Working depth too large Set to correct working depth. Poor results Working depth too small Set to correct working depth. Worn blades Replace damaged or worn blades. Model TC70010-1...
Page 12
RTC10/16-C Center Handle RTC10/16-HDW Handle Hardware Kit CALL US FIRST !! Call us first with questions about operating or maintaining your tool at 1-800-633-1501 between 8:00 a.m. – 5:00 p.m. Eastern Standard Time, or get assistance on www.americanlawnmower.com. Model TC70010-1...
Two (2) year limited warranty on Yardworks outdoor power equipment. The Great States Corp. (GSC) warrants to the original owner that this Yardworks product and service part is free from defects in materials and workmanship and agrees to repair or replace any defective product or part for the warranty period as stated above.
Need help?
Do you have a question about the TC70010-1 and is the answer not in the manual?
Questions and answers
Where is the spring located