Canon imageCLASS MF8180C Starter Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. All in One Printer
  5. Color imageCLASS MF8180c
  6. Starter manual
Canon imageCLASS MF8180C Starter Manual

Canon imageCLASS MF8180C Starter Manual

Hide thumbs Also See for imageCLASS MF8180C:
Table of Contents

Advertisement

Quick Links

Download this manual
Starter Guide
Please read this guide before operating this equipment.
After you finish reading this guide, store it in a safe place for future reference.
ENG

Advertisement

Table of Contents
loading

Related Manuals for Canon imageCLASS MF8180C

Summary of Contents for Canon imageCLASS MF8180C

  • Page 1 Starter Guide Please read this guide before operating this equipment. After you finish reading this guide, store it in a safe place for future reference.

  • Page 2: Setting The Machine

    Setting the Machine Remove the Shipping Materials Remove all shipping tapes, styrofoam, and small black pad from the machine. Lift the document feeder slightly and pull Lift the platen glass cover and remove out the protective sheet straight to the tapes and protective sheets on the remove.

  • Page 3: Do You Have Everything

    Do You Have Everything? ● Machine ● Drum Cartridge ● Toner Cartridges ● Document Feeder Tray (packed with a black plastic bag) (Yellow, Magenta, Cyan, Black) ● Destination Labels (Fax Labels) ● Power Cord ● Telephone Cable ● USB Cable ●...

  • Page 4: Connect Telephone Cables

    Connect Telephone Cables Connect external devices as follows: = External device jack = Telephone line jack • Telephone or answering machine Telephone or answering machine EX T. LI NE Telephone Machine line • Telephone and answering machine LINE TEL Telephone Answering Telephone machine...
  • Page 5 Connect Power Cord and Select Language and Country 230V Connect the power cord into the rear socket and If the message <DISPLAY LANGUAGE> If the message <COUNTRY SELECT> appears, The machine enters the standby mode. the wall outlet (230V) to turn on the machine. appears, use [ ] or [ ] to select the language...
  • Page 6 Install the Drum Cartridge Lift the scanning platform (A), and open the Remove the drum cartridge from the bag. Keep Remove the shipping materials. Remove the protective cover. cartridge cover (B) when the whirring sound the bag for storing the cartridge when the stops.

  • Page 7: Install The Toner Cartridges

    Install the Toner Cartridges Menu Menu [Menu] [(/)] [OK] Close the cartridge cover (B) and lower the The LCD alternates between the standby display Press [Menu] on the operation panel. Press [ ] or [ ] to select scanning platform (A). Please wait until the and the message to insert toner cartridges (Y/M/ <10.MAINTENANCE>, then press [OK].
  • Page 8 Hold the cartridge on a flat stable surface with Insert the cartridge in the machine as far as it will Close the cartridge cover and wait for the NOTE one hand, and pull out the seal completely with go. Keep the guides (A), (B) on both sides cartridge cradle to rotate and stop, and then When handling a toner cartridge, press and hold the the other hand.

  • Page 9: Load Paper

    Load Paper Turn and pull out the shipping material a, and Grasp paper cassette, pull it out completely, and Pinch and slide the blue side paper end guides set it aside. press the inner plate b to set it on the bottom. by both hands to match the size of paper.

  • Page 10: Sender Information

    Setting the Machine for Sending Faxes Sender Information The sender information you register in the machine appears in the header of each page received by You can enter the following characters in each input mode: your recipient. @.-_/ @.-_/ 31/12 2005 17:30 0123456789 YOUR NAME...
  • Page 11 Register Sender Information Press [Menu]. Press [ ] or [ ] to Press [ ] or [ ] to select <8.TIMER select <1.DATE/TIME [OK] Numeric keys SETTINGS> on the LCD, SETTING>, then press Menu Menu then press [OK]. [OK]. [Menu] [(/)] PQRS WXYZ...

  • Page 12: Set The Telephone Line Type

    Set the Telephone Line Type Press [Menu]. Press [ ] or [ ] to Press [ ] or [ ] to Press [ ] or [ ] to Press [ ] or [ ] to Press [ ] or [ ] to select <4.FAX select <2.USER select <1.TEL LINE...

  • Page 13: Select The Receive Mode That Suits Your Needs

    Setting the Machine for Receiving Faxes Select the Receive Mode that Suits Your Needs Set the Receive Mode Press [Menu]. Press [ ] or [ ] to Press [ ] or [ ] to Follow the chart below to determine the right receive mode for your needs. select <4.FAX select <1.RECEIVE SETTINGS>, then press...

  • Page 14: Installing Software

    Installing Software Install Software USB Connection Before Installation: System Requirements Microsoft Windows 98 • Do not connect the USB cable before ® CPU: Intel Pentium 90 MHz or faster installing the software. If you connect the Memory: 32 MB or more Available Hard Disk Space: 115 MB or more USB cable before installing the software Microsoft Windows Me...
  • Page 15 Network Connection Press [Menu]. NOTE • This machine is set by default to automatically draw an IP address using DHCP. If your network server or router is configured to provide a DHCP address, all you need to do is connect a network cable and turn on the machine.
  • Page 16 ● To obtain an IP address automatically (dynamic allocation): Press [ ] or [ ] to select <ON>, then Press [ ] or [ ] to select <1.DHCP>, Press [ ] or [ ] to select <ON> or Press [Stop/Reset] to return to the press [OK].
  • Page 17 Enter the subnet mask using the numeric Press [ ] or [ ] to select Enter the default gateway address Press [Stop/Reset] to return to the <4.DEFAULT GATEWAY>, then press keys, then press [OK]. using the numeric keys, then press standby display.
  • Page 18 If the target machine is not listed in the Device List, click [Search by IP Address] and enter the IP address, then click [OK]. If you do not know the machine's IP address, see “Step 3 Checking Network Settings,” in Chapter 1 in the Software Guide.
  • Page 19 Connection” or in step 16 of “Network Connection” then follow the instructions that appear on the screen. ● Canon Cover Sheet Editor The Canon Cover Sheet Editor enables you to create original fax cover sheet templates for use with Canon fax driver. For details, see online help for this program. ● NetSpot Device Installer (NSDI) NetSpot Device Installer enables you to set up the machine for network operations.

  • Page 20: Sending Faxes

    Sending Faxes Follow this procedure to send a fax. For details on sending features, see the Facsimile Guide. Load a Document Enter the Fax Mode Enter the Fax Number Send the Document Menu Menu PQRS WXYZ Place the document (face down) on the platen Press [FAX].

  • Page 21: Receiving Faxes

    Receiving Faxes Follow this procedure to set the machine for receiving faxes. For details on receiving features, see the Facsimile Guide. Enter the Setting Menu Enter the Receive Mode Select the Receive Mode Exit the Setting Menu Menu Menu Menu Menu Menu Menu...
  • Page 22 Copying Follow this procedure to make a copy. For details on copying features, see the User’s Guide. Load a Document Enter the Copy Mode Enter Quantity Start Copying Menu Menu PQRS WXYZ Place the document (face down) on the platen Press [COPY].
  • Page 23 Printing Follow this procedure to print a document from your computer. Make sure that the printer driver is installed. For details on printer driver settings, see the Software Guide (in the User Software CD). Adjust Preferences Print the Document Start the Print Command Select the Printer Click [Print] or [OK].
  • Page 24 Scanning Follow this procedure to scan a document to your computer. Make sure that the scanner driver is installed. For details on scanner driver settings, see the Software Guide (in the User Software CD). Set a Document Enter the Scan Mode Set the Scan Method Start Scanning Press [B&W Start] or [Color Start].
  • Page 25 Select the Fax Set the Destination Send the Document From an open document on an application, Select the fax icon [Canon MF8100 Series Specify the name and fax number in [Sending Click [OK] in the Fax Sending Settings. click [File] → [Print].
  • Page 26 Remote UI Follow this procedure for Remote UI management. For details, see the Remote UI Guide. Prepare the Network Startup Log on Operate the Machine Now you can manage the machine on the Set up the machine for use in a TCP/IP Start the web browser, enter the IP address of Select the user mode, then click [OK].

  • Page 27: Replacing The Toner Cartridge

    Replacing the Toner Cartridge ∗ ∗ When <PREPARE NEW CART> and then <REPLACE CARTRIDGE> appears in the LCD, replace the Confirm the color of the label on the toner Remove the protective cover. cartridge holder, then take out a toner cartridge toner cartridge of the indicated color with a new toner cartridge.
  • Page 28 Place the toner cartridge on a flat surface, then Press and hold the blue buttons on the top of pull out the sealing tape completely (approx. 45 the toner cartridge and install it in the machine. cm in length) while supporting the toner Keep the guides (A), (B) on both sides aligned with the cartridge.

  • Page 29: Replacing The Drum Cartridge

    Replacing the Drum Cartridge Drum cartridges are consumable products. Replace the drum cartridge with a new one when <PREPARE Remove the packing materials (E) and (F) by holding the Hold the drum cartridge with both hands and grips and pulling them in the direction of the arrows. install it in the machine.

  • Page 30: Clearing Jams

    Clearing Jams Paper Jams Inside the Machine Insert the cassette in the machine. Place the drum cartridge in the protective bag. Lock it by pushing down toward you. If the message <REC. PAPER JAM> and <OPEN PRINTER COVER> appear in the LCD, remove the paper in the following procedure.
  • Page 31 Removing Jammed Paper from Paper Jam Behind the Machine Close the face up cover. Place the drum cartridge in the protective bag. the ADF If the message <REC. PAPER JAM> and <OPEN PRINTER COVER> appear in the LCD, remove the When the document jams in the ADF, the LCD paper using the following procedure.
  • Page 32 Close the cartridge cover and lower the Open the sub-output tray. Close the sub-output tray. Paper Jam in the Drum Cartridge scanning platform. When the paper is jammed in the drum cartridge as shown in the figure, remove the jammed paper using the following procedure.
  • Page 33 ® ENERGY STAR guidelines for energy Copyright © 2006 by Canon Inc. All rights reserved. No part of this the instructions in this guide. Adjust only those controls that are efficiency. publication may be reproduced, transmitted, transcribed, stored in a covered by the instructions in this guide.
  • Page 34 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands CANON FRANCE S.A.S.

Table of Contents