LG LHB645N - 3D Blu-ray/DVD Home Cinema System Manual

Please read this manual carefully before operating your set and retain it for future reference.

To view the instructions of advanced features, visit http://www.lg.com and then download Owner's Manual.

Some of the content in this manual may differ from your unit.

MODEL LHB645N

www.lg.com
Copyright © 2017-2018 LG Electronics Inc. All Rights Reserved.

SPEAKERS Connect to speakers.

LAN Connect to Internet.

HDMI OUT TO TV Connect to TV.

AUX (L/R) INPUT Connect to analogue device.

OPTICAL IN Connect to digital device.

ANTENNA FM Connect to radio antenna.

Speaker Assembling

Speaker Connection

Speaker design and connection method may be different according to models.

TV Connection

Connect with the Player and TV using

HDMI ARC () or HDMI & Optical ().

HDMI(ARC) Connection

1. Connect the Player to the TV using HDMI cable.
2. Set the input selector to HDMI on the TV.
3. Set up [External Speaker (HDMI ARC)] on your TV setting menu.
4. Follow the instructions on the TV screen using remote control.
   

HDMI & Optical Connection

1. Connect the Player to the TV using HDMI & Optical cable.
2. Set the input selector to HDMI on the TV.
3. Set up [External Speaker (Optical)] on your TV setting menu.
4. Follow the instructions on the TV screen using remote control.
   

Home Menu

After initial setup, Home menu appears on the TV screen. Enjoy various functions on the player.

To enjoy online services, the player should be connected to internet through wired or wireless connection.

For more information, download the online owner' s manual. http://www.lg.com

Additional Information

Specification

Power requirements	Refer to the main label.
Power consumption	Refer to the main label.
	Networked standby: 1.5 W (If all network ports are activated.)
Dimensions (W x H x D)	Approx. 360 mm x 60,5 mm x 299 mm
Bus Power Supply (USB)	5 V 500 mA
Amplifier (Total RMS output power)	1,000 W RMS

Design and specifications are subject to change without notice.

How to disconnect the wireless network connection or the wireless device
Turn off the unit.

Replacement of battery

OPEN SOURCE SOFTWARE NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

Customer Support

You can update the Player using the latest software to enhance the products operation and/or add new features. To obtain the latest software for this player (if updates have been made), proceed the software updates or visit http://www.lg.com or contact LG Electronics customer care center.

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

Do not install this equipment in a confined space such as a book case or similar unit.

Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.

Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to.

his product employs a Laser System. To ensure proper use of this product, please read this owner's manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center.

Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.

concerning the Power Cord
The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.

The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus.

NOTICE: For safety marking information including product identification and supply ratings, please refer to the main label on the bottom or the other surface of the product.

This device is equipped with a portable battery or accumulator.

How to Safely remove the batteries or the battery pack from the equipment: To Remove the old batteries or battery pack, follow the assembly steps in reverse order. To prevent contamination of the environment and bring on possible threat to human and/or animal health, the old batteries or the battery pack must be put in an appropriate container at designated collection points. Do not dispose of batteries or battery pack together with other waste. It is recommended that you use local, free reimbursement systems batteries or battery packs, (may not be available in your area). The batteries or the battery pack should not be exposed to excessive heat such as sunshine, fire or the like.

Symbols

~	Refers to alternating current (AC).
	Refers to direct current (DC).
	Refers to class II equipment.
	Refers to stand-by.
	Refers to "ON" (power).
	Refers to dangerous voltage.