Table of Contents
Advertisement
6
Slide the I/O-board cable into the connector on the system board and close the latch to secure the cable.
7
Slide the hard-drive cable into the connector on the system board and close the latch to secure the cable.
8
Slide the touchpad cable into the connector on the system board and close the latch to secure the cable.
9
Slide the keyboard back-light cable into the connector on the system board and close the latch to secure the cable.
10
Slide the keyboard cable into the connector on the system board and close the latch to secure the cable.
11
Connect the speaker cable to the system board.
Post-requisites
1
Replace the
solid-state drive/Intel
2
Replace the
heat
sink.
3
Replace the fan.
4
Replace the
wireless
card.
5
Replace the
memory
modules.
6
Replace the battery.
7
Replace the
base
cover.
Entering the Service Tag in the BIOS setup program
1
Turn on or restart your computer.
2
Press F2 when the Dell logo is displayed to enter the BIOS setup program.
72
Replacing the system board
Optane.
Advertisement
Table of Contents
