(General: Scheduled/ Motion Detect /Alarm) in the Schedule interface. Check the box to enable the save
functions.
Note:
•
Only device supports SD card has local.
Refer to the following sheet for detailed information.
Parameter
Event Type
Local
FTP
6.5.2.2
Local (except WV-V1330LK)
The [Local] interface is shown as in Figure 6-49.
Here you can view local Micro SD card information. You can also operate the read-only, write-only, hot swap
and format operation.
•
Click "Read only" to set the SD card as read only.
Click "Read & Write" to set the SD card as read & write.
•
Click "Hot Swap" to realize hot swap upon the SD card.
•
Click "Format" to realize formatting upon the SD card.
•
Figure 6-48
It includes: scheduled, motion detect and alarm.
It saved in the SD card. (except WV-V1330LK)
It saved in the FTP server.
Figure 6-49
Function
60
Need help?
Do you have a question about the WV-V2530LK and is the answer not in the manual?
Questions and answers