Table of Contents
Advertisement
en Familiarising yourself with your appliance
If the cooking time is relatively long, you can switch
the appliance off 10 minutes before the cooking time
ends.
¡ There will be enough residual heat to finish cooking
the dish.
Remove any accessories that are not being used from
the cooking compartment.
¡ Accessories that are not being used do not need to
be heated.
Allow frozen food to defrost before cooking.
¡ This saves the energy that would otherwise be re-
quired to defrost it.
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
On certain models, specific details such as colour and
shape may differ from those pictured.
2
1
Display with setting ring
You can use the digital setting ring to set the
appliance via the display.
You will see the current setting values, options
or relevant information.
→ "Display", Page 6
2
Buttons
You can use the buttons to directly set various
functions.
→ "Buttons", Page 6
4.2 Buttons
You can use the buttons to directly select various func-
tions.
Button
Function
Switch the appliance on or off.
→ "Basic operation", Page 11
Open the "Operating modes" menu.
→ "Operating modes", Page 7
Go back one setting.
6
1
2
Switch off the display in the basic setting.
¡ Energy is saved when the display is switched off.
Note:
The appliance requires:
¡ a maximum of 2 W in networked standby mode
¡ a maximum of 1 W when the appliance is not con-
nected to the network, with the display switched on
¡ a maximum of 0.5 W when the appliance is not con-
nected to the network, with the display switched off
Button
Function
Start or pause operation.
→ "Basic operation", Page 11
Select the timer.
→ "Setting the timer", Page 13
Press and hold for approx. 4 seconds
to activate the childproof lock.
→ "Childproof lock", Page 15
4.3 Display
The display is divided into different areas.
Digital setting ring
Use the digital setting ring on the outside of the display
to change the setting values.
When you reach the minimum or maximum value avail-
able, this value remains in the display. If required, use
the setting ring to turn the value back again.
Status indicator
Status information is shown at the top of the display.
Symbol
Meaning
Timer is activated.
→ "Setting the timer", Page 13
Childproof lock is activated.
→ "Childproof lock", Page 15
The appliance door is locked due to the
cleaning function or childproof lock.
→ "Cleaning function 'Pyrolytic active-
Clean'", Page 20
→ "Basic settings", Page 16
WiFi signal strength for Home Connect.
The more lines of the symbol are filled,
the better the signal.
If the symbol is struck through
is no WiFi signal.
If there is an "x" at the symbol
is no connection to the Home Connect
server.
→ "Home Connect ", Page 17
, there
, there
Advertisement
Table of Contents
