Page 1
proform.com Model No. PFTL39920.2 USER’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to my.proform.com. CUSTOMER CARE For service at any time, go to support.proform.com.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fi re, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on the treadmill before using the treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
Page 4
19. Always stand on the foot rails when starting frame securely in the storage position. Do or stopping the walking belt. Always hold the not operate the treadmill while it is folded. handrails while using the treadmill. 26. Do not change the incline of the treadmill by 20.
SPORT reading this manual, please see the front cover of this ® 3.0 treadmill. The SPORT 3.0 treadmill offers a selec- manual. To help us assist you, note the product model tion of features designed to make your workouts at number and serial number before contacting us.
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
ASSEMBLY • To hire an authorized service technician to • Left parts are marked “L” or “Left” and right parts assemble the treadmill, call 1-800-445-2480. are marked “R” or “Right.” • Assembly requires two persons. • To identify small parts, see page 7. •...
Page 9
3. Identify the Left and Right Handrail Bottoms (73, 74), and slide them onto the Uprights (80, 81) as shown. 4. Set the console assembly (A) face down on a soft surface to avoid scratching the console assembly. Attach the Right and Left Trays (95, 94) with six #8 x 3/4"...
Page 10
6. Connect the Upright Wire (78) to the con- sole wire (B). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. Insert any excess wire into the console assembly (A). 7.
Page 11
8. Slide the Right Inner Upright Cover (84) between the Right Upright (81) and the Motor Hood (62). Next, press the Right Outer Upright Cover (85) against the Right Inner Upright Cover until they snap together. Then, tighten a #8 x 3/8" Screw (6) into the Right Outer Upright Cover (85).
Page 12
10. IMPORTANT: You must activate your Console (97) to begin using its exclusive features. First, plug in the power cord (see page 13) and turn on the power (see page 15). Then, using your smartphone or tablet, go to iFit.com/activate and follow the instructions to activate the Console (13).
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD capable of carrying 15 or more amps. To avoid overloading the circuit, do not plug other electrical Use a Surge Suppressor devices, except for low-power devices such as cell phone chargers, into the surge suppressor or into Your treadmill, like other electronic equipment, can be an outlet on the same circuit.
Page 14
CONSOLE DIAGRAM FEATURES OF THE CONSOLE To turn on the power, see page 15. To use the man- ual mode, see page 15. To use an onboard workout, IMPORTANT: To activate your console and begin see page 17. To use an iFit workout, see page 18. To using its exclusive features, see assembly step 10 connect your heart rate monitor to the console, see on page 12.
Page 15
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
Page 16
5. Follow your progress with the display. To manually advance the scan cycle, press the Scan button repeatedly. The display can show the following workout information: To turn off the scan mode, press the Display button; the scan indicator and the word SCAN will Calories (CALS)—The approximate number of turn off.
Page 17
HOW TO USE AN ONBOARD WORKOUT The workout will continue in this way until the last segment ends. The walking belt will then 1. Insert the key into the console. slow to a stop. See HOW TO TURN ON THE POWER on page 15. If the speed or incline setting for the current seg- ment is too high or too low, you can manually over- 2.
Page 18
HOW TO USE AN IFIT WORKOUT 4. Select an iFit workout. The console offers access to a large and varied library In the iFit app, touch the buttons at the bottom of of iFit workouts when you download the iFit app to your the screen to select either the main menu (Home smart device and connect it to the console.
Page 19
To pause the workout, simply touch the screen or HOW TO CONNECT A HEART RATE MONITOR TO press the Stop button. To continue the workout, THE CONSOLE press the play icon on the screen, or press the Start button. The console is compatible with Bluetooth Smart heart rate monitors.
Page 20
THE SETTINGS MODE Total Time—The word TIME will appear in the display. The display will show the total number of 1. Select the settings mode. hours that the treadmill has been used. To select the settings mode, press the gear button (P). The first settings screen will appear in the display.
HOW TO USE THE SOUND SYSTEM THE OPTIONAL CHEST HEART RATE MONITOR To play music or audio books through the console Whether your sound system while you exercise, plug a 3.5 mm male goal is to to 3.5 mm male audio cable (not included) into the burn fat or to jack on the console and into a jack on your personal strengthen your...
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL Before folding the treadmill, remove the key and Before moving the treadmill, fold it as described at the unplug the power cord. CAUTION: You must be left.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE d. The console requires activation. If you have not activated the console, see assembly step 10 on Regular maintenance is important for optimal per- page 12. formance and to reduce wear. Inspect and properly tighten all parts each time the treadmill is used. SYMPTOM: The power turns off during use Replace any worn parts immediately.
Page 24
SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the specifications described on page 13. a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD.
EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian.
Page 26
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
PART LIST Model No. PFTL39920.2 R1220A Key No. Qty. Description Key No. Qty. Description M10 x 60mm Screw Walking Belt 5/16" x 2" Screw Platform Cushion M10 x 20mm Screw Belt Guide #10 x Tek 1" Screw Drive Roller/Pulley M4.2 Star Washer Drive Belt #8 x 3/8"...
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...
Need help?
Do you have a question about the SPORT 3.0 and is the answer not in the manual?
Questions and answers