HORI Ace Combat 7 (PS4-094A) - Flight Stick Manual

Before using this product please read the instructions carefully.

After reading the instruction manual, please keep it for reference.

Main Features

Joystick
Length	180mm
Depth	210mm
Height	250mm
Weight	0.6kg
Cable Length	3m
Rating	5V 60mA
Throttle
Length	180mm
Depth	210mm
Height	190mm
Weight	0.6kg
Cable Length	1m

Caution

To Parent / guardian, Please read carefully

For Health (Regarding Vibration)

• Stop using this product if you begin to feel tired, experience discomfort or pain in your hands or arms. If the condition persists, consult a doctor.
• Do not make contact with your head, elbow, knee, face, abdominal area or any other parts of the body.
• Do not use the vibration function if you have any ailment or injury to the bones and/or joints.
• Do not use the vibration function if you have any dislocated or fractured bones in your fingers, hands, wrists, or if you have any torn or strained muscles.
• Avoid prolonged use of this product. Take a break every 30 minutes of gameplay.

To Avoid Malfunction

• Never disassemble, repair, or modify this product.
• Do not use this product for anything other than its intended purpose. We are not responsible for any accidents or damages in the event of use other than the intended purpose.
• Keep the controller away from dusty or humid areas.
• Do not apply strong impact or weight on the product.
• Do not pull roughly or bend the cable of the controller.
• If product needs cleaning, use only a soft dry cloth. Do not use any chemical agents like benzine or thinner.

To Avoid Injury

• Keep this product out of the reach of children under 3.
• Keep this product away from small children. Seek medical advice immediately if it is swallowed.
• Ensure there are no obstacles within the moving range of the main stick and throttle.
• Do not put your finger or clothes inside the movable parts.
• Do not throw this product to a person or object.

Includes

Compatible Systems

PlayStation_®4 / PlayStation_®3 / PC

※Functions as PC controller through XInput.
This product does not support DirectInput.

Before using this product with PlayStation^®4 and PlayStation^®3, be sure to check the instruction manual of each hardware console.

*Some functions may not function as desired depending on the console software version.
In that case, please upgrade to the latest system software before use.
(PlayStation_®4... Ver. 4.73 or later recommended, PlayStation_®3... Ver.2.80 or later recommended)
Please refer to your console's user manual for system software version check and update instructions.

*This product does not feature light bar, motion sensors. In addition, this product does not support features other than those described. Please note this product may not support some PlayStation_®4 and PlayStation_®3 standard software. For details, please visit our website (http://www.horiusa.com).

*This product will not work on the PlayStation_®2, PlayStation_®, or PS one_®.

*This product is not a wireless controller.

*Please also refer to our website (http://www.hori.jp/support/) for additional information.

*PC will automatically recognize this product once the USB is plugged in.

Layout

Joystick

Throttle

*The PS button will not turn the PlayStation_®4 or PlayStation_®3 systemʼs power on.

*Throttle / Rudder setting above based on Throttle / Rudder Toggle Switch Mode 1.

Platform Toggle Switch

The Platform Toggle Switch toggles between PlayStation_®4 and PlayStation_®3 compatibility.

*Toggle the switch before connecting.

*PC will automatically recognize once the USB is inserted.

How to connect

1. Insert the modular connector to the joystick modular jack.
2. Insert the USB connector to the console USB port.

*Insert the modular connector and USB connector firmly. Do not use the cable if tangled.

*Plugging and unplugging during gameplay may cause a malfunction.
Reconnect the connector if any malfunction occurs.

*Make sure to check the connector direction before connecting.

Console USB ports

Attaching the Suction Cups

1. Insert the suction cups into the holes located on the bottom side of joystick and throttle.
2. Rotate the suction cups 90 degrees to lock in place.

*Please attach to smooth, flat, stable surface. May not fully affix depending on the mounting surface material.

*Use a sturdy table when attaching this product with suction cups.

*Avoid attaching to glass or other fragile furniture. When removing the suction cups, be careful not to damage the furniture the product is attached to.

Attaching the Handrest Extender

If you feel the joystick does not fit for your hands, try attaching the Handrest Extender to the base of the joystick. Peel off the sheet on the backside of the Handrest Extender and affix onto the base of the joystick as shown in the diagram.

*Make sure to remove any dust or dirt from the armrest prior to affixing the Handrest Extender.

Expansion port

Connect the headset / microphone into the expansion port to use. Before placing a headset onto your ears, make sure to lower the volume to avoid hearing damage.

Headset usage at high volumes for extended periods of time may result in permanent hearing damage.

If the volume is raised too high, there may be sudden loud noises that may damage your ears.

Headphone / microphone feature is only for PlayStation_®4. Not compatible with PlayStation_®3 / Windows PC.

Touch Pad

This product features DUALSHOCK_®4 wireless controller touch pad functionality. The area of the touch pad is as shown below.

Touch pad is only for PlayStation_®4.
Not compatible with PlayStation_®3 / Windows PC.

Adjusting throttle resistance

The resistance can be adjusted by turning the screw located on the bottom side of the throttle.

Adjusting joystick sensitivity

The joystick sensitivity toggle switch can be set to 3 different levels of sensitivity.

Throttle / Rudder Toggle Switch

The throttle / rudder sensitivity toggle switch can be set to 3 different settings as shown in the diagram.

	1	2	3
Switch position
Throttle	R2 (UP) / L2 (DOWN)	R1 (UP) / L1 (DOWN)	Right Analog Stick vertical control
Rudder	R1 (RIGHT) / L1 (LEFT)	R2 (RIGHT) / L2 (LEFT)	Right Analog Stick horizontal control

Right analog stick will not function during Setting 3 (R3 will function)

Troubleshooting

Please check the following for any issues

1. Pressing the PS button does not turn on the PlayStation_®4 system
   The PS button on this product will not turn on the PlayStation_®4 system.
   Please press the PS button on the wireless controller (DUALSHOCK_®4) or press the power button on the PlayStation_®4 system.
2. The PS button does not respond during gameplay
   Please check the PS4/PS3 System Toggle Switch on this product. Make sure it is set to "PS4" for PlayStation_®4 and "PS3" for PlayStation_®3.
3. Controls respond in the home screen but not during gameplay
   For the PlayStation_®4, controls will not respond if the user account is different from the one used at the start of the game. Make sure to always log in with the same user account.
4. The controller will not respond upon pressing the PS button
   You must first pair this controller with the PlayStation_®4 system using a wireless controller (DUALSHOCK_®4).

Although the instruction manual states that the products is for the PlayStation_®4 system, it is also compatible with the PlayStation_®3 system.

Please also refer to our website (http://www.hori.jp/support/) for additional information.

• The image on the packaging may differ from the actual product.
• The manufacturer reserves the right to change the product design or specifications without notice.
• "PlayStation","PS one"and"DUALSHOCK"are registered trademarks or trademarks of Sony Interactive Entertainment Inc. All rights reserved.
  All other trademarks are the property of their respective owners. Manufactured and distributed under license from Sony Interactive Entertainment LLC.
• "" and "" are registered trademarks of HORI.