Adjusting The Myride™ Suspension System - Toro TimeCutter MX 4250 Operator's Manual

Adjusting the MyRide™
Suspension System
For Machines with the MyRide™
Suspension System
Note:
To make adjusting the MyRide™ suspension
system easier, pivot the seat forward and install the
prop rod to take weight off the shock assemblies.
The MyRide™ suspension system adjusts to provide
a smooth and comfortable ride. You can adjust the
rear 2-shock assemblies to quickly and easily change
the suspension system. Position the suspension
system where you are most comfortable.
Adjusting the Rear-Shock
Assemblies
The slots for the rear-shock assemblies have detent
positions for reference.
The following graphic shows the position for a soft or
firm ride and the different detent positions
1. Firmest position
2. Softest position
Note:
Ensure that the left and right rear-shock
assemblies are always adjusted to the same positions.
Adjust the rear-shock assemblies
(Figure
Figure 11
3. Detents in the slots
(Figure 12).
11).
g231347
20
Figure 12
g231392