Download Print this page

One for All URC2110 Manual page 5

Essence tv universal remote

Advertisement

Available languages

Available languages

The Essence TV remote is pre-programmed to control a
Samsung TV out of the box. If you have a Samsung TV, after
you have inserted batteries, press a few keys to confirm that
the remote operates your TV.
If the brand of your device is shown in the SimpleSet List next
to a digit key, you can use the SimpleSet system described in
this section, please locate the brand of your device and note
the key associated with it.
TV
To set up your device:
1.
2.
3.
4.
5.
6.
• If you find one or more keys do not work as you expect, start
again at step 2 – the remote will start with the next code in
the memory.
If the brand of your device is not listed in the SimpleSet
feature, you can set up by trying codes individually. To do
this, firstly locate your brand in the Code List. Codes are listed
by brand and device, and in order of popularity.
1.
2.
3.
4.
5.
6.
713376 Essence-TV CAN_Manual URC2110 RDN1011222 incl. Codelist_75x250.indd 5
713376 Essence-TV CAN_Manual URC2110 RDN1011222 incl. Codelist_75x250.indd 5
SETUP
SIMPLESET
LG
Onn, Insignia
Philips, Magnavox
Roku, Element
Samsung, Panasonic
Sharp, Hisense
Sony, Sanyo
TCL, RCA
Toshiba, Westinghouse
VIZIO
Turn on your device (not on standby) and point the
Essence remote towards it.
Hold down the SETUP key until the LED
blinks twice
Hold down the digit key for your brand
as listed in the tables above - e.g. 3 for a
Philips TV.
The remote will send a Power command every 3
seconds.
As soon as your device reacts by turning off or
The LED will blink twice and the remote should
now operate your device.
SETUP BY CODE
Turn on your device (not on standby) and point the
Essence remote towards it.
Hold down the SETUP key until the LED
blinks twice
Enter the first 4 digit code listed for your
brand (e.g. 1840 for LG).
The LED will blink twice on the last digit of the code.
Now aim the remote towards your device
and press the POWER key.
If the device turns off your remote is ready to use. If
not, repeat steps 2-5 with the next code in the list.
5
01-12-2022 16:20
01-12-2022 16:20

Advertisement

loading
Need help?

Need help?

Do you have a question about the URC2110 and is the answer not in the manual?

Questions and answers