Advertisement
Although the instruction manual states that the products is for the PlayStation®4 system, it is also compatible with the PlayStation®3 system.
Please also refer to our website (http://www.hori.jp/support/) for additional information.
Pressing the PS button does not turn on the PlayStation®4 system
The PS button on this product will not turn on the PlayStation®4 system. Please press the PS button on the wireless controller (DUALSHOCK®4) or press the power button on the PlayStation®4 system.
Please check the PS4/PS3 System Toggle Switch on this product. Make sure it is set to "PS4" for PlayStation®4 and "PS3" for PlayStation®3. Set to "PS3" when using PC (Gamepad mode) and "KBD" when using PC.
(Keyboard mode)
Controls respond in the home screen but not during gameplay
For the PlayStation®4, controls will not respond if the user account is different from the one used at the start of the game. Make sure to always log in with the same user account.
The controller will not respond upon pressing the PS button
You must first pair this controller with the PlayStation®4 system using a wireless controller (DUALSHOCK®4).
PlayStation 4 / PlayStation 3 / PC
Before using this product with PlayStation®4 and PlayStation®3,be sure to check the instruction manual of each hardware console.
Hardware | |
System Requirements | WIndows 10/8.1/8/7 |
TAC Software | |
System Requirements | iOS: 8.0 or later / Android 4.4 or later |
* Functions as PC controller through XInput. This product does not support DirectInput.
Depending on the console software version, not all functions may be available.
In that case, please upgrade to the latest system software before use.
(PlayStation® 4... Ver. 4.73 or later recommended, PlayStation®3... Ver.2.80 or later recommended) Please refer to your console's user manual for system software version check and update instructions.
This product does not feature light bar, motion sensors. In addition, this product does not support features other than those described. Please note this product may not support some PlayStation®4 and PlayStation®3 standard software. For details, please visit our website (http://www.hori.jp) or contact us.
* This product will not work on the PlayStation®2, PlayStation®, or PS one®.
* This product is not a wireless controller or wireless mouse.
PlayStation®4 | PlayStation®3 | PC(Gamepad mode) | PlayStation®4 / PC(Keyboard mode) | |
![]() | ![]() | ![]() | ![]() | |
![]() | Connector | |||
![]() | Controller cable( 3.0m / 9.8ft) | |||
![]() | PS Button* | GUIDE Button | Windows Key | |
![]() | SHARE Button | SELECT Button | BACK Button | Enter Key ★ |
![]() | OPTIONS Button ★ | START Button ★ | ESC Key ★ | |
![]() | △ Button ★ | Y Button ★ | Q Key★ | |
![]() | Left analog stick (↑) ★ | W Key ★ | ||
![]() | L1 Button ★ | L2 Button★ | LB Button ★ | E Key ★ |
![]() | ![]() | X Button ★ | R Key★ | |
![]() | ![]() | A Button★ | T Key ★ | |
![]() | Quick Button ★ | TAB Key ★ | ||
![]() | Left analog stick (←) ★ | A Key ★ | ||
![]() | Left analog stick (↓) ★ | S Key ★ | ||
![]() | Left analog stick (→) ★ | D Key ★ | ||
![]() | Snipe Button ★ | F Key ★ | ||
![]() | R1 Button ★ | R2 Button ★ | RB Button ★ | G Key ★ |
![]() | Profile LED ★ | |||
![]() | L3 Button ★ | LSB Button ★ | LEFT SHIFT Key ★ | |
![]() | FN Button★ | |||
![]() | ![]() | B Button ★ | C Key ★ | |
![]() | R3 Button ★ | RSB Button ★ | V Key ★ | |
![]() | Extension port | ー | ||
![]() | ![]() | B Button ★ | LEFT CTRL key ★ | |
![]() | Walk Button ★ | Z Key ★ | ||
![]() | ![]() | A Button ★ | SPACE Key ★ | |
![]() | Directional Pad | W/A/S/D Key ★ | ||
![]() | USB port | |||
![]() | Touch pad functionality ★ | ![]() | A Button ★ | M Key ★ |
![]() | PS4TM / PS3TM System Toggle Switch | |||
![]() | Connector | |||
![]() | Mouse Cable(1.0m / 3.3ft) | |||
![]() | Scroll Wheel Long Press: R3 button ★ Scroll up / scroll down: ★ NC (Buttons will not respond) | Scroll Wheel Long Press: RSB button ★ Scroll up / scroll down: ★ NC (Buttons will not respond) | Scroll Wheel ★ Scroll up / scroll down ★ | |
![]() | Sensitivity Up | |||
![]() | Sensitivity Down | |||
![]() | R2 Button ★ | R1 Button ★ | RT Button ★ | Left click ★ |
![]() | L2 Button ★ | L1 Button ★ | LT Button ★ | Right click ★ |
![]() | L1 Button ★ | L2 Button ★ | LB Button ★ | Forward ★ |
![]() | R1 Button ★ | R2 Button ★ | RB Button ★ | Back ★ |
★ - Other buttons may be assigned.(To assign button function, please refer to the Assign Mode instructions.)
*The PS button will not turn the PlayStation®4 or PlayStation®3 system' s power on.
If your controller is not being recognized by your PlayStation®4, please try the following steps
The Platform Toggle Switch toggles between PlayStation®4 and PlayStation®3 compatibility. Switch the toggle switch to the desired platform before connecting.
Connecting to the PlayStation®4 system
Connecting to the PlayStation 3 system/ Connecting to the PC
(Use it as keyboard)
This product has one USB port specifically for connecting a mouse.
* Please do not plug in anything besides a mouse.
* There is no guarantee that anything besides a mouse will function.
* Because there is protection against excess electrical current use, do not plug in any type of USB memory or USB charger.
* Please note that we cannot be held responsible for any type of data loss due to user misuse.
* This product uses up to 200mA.
* If a connected product is not functioning properly, it may be due to protection against excess electrical current. Please try unplugging the mouse from the keyboard and the keyboard from the PlayStation®4 console and reconnecting everything again. If it still does not function, please use another device.
The included mouse uses an infrared sensor.
*The infrared sensor may not function properly on top of the following materials.
Please do not look directly into the red optical sensor. There is the possibility for eye damage.
(PlayStation 4 only)
Connect the headset into the Expansion port.
Before placing a headset onto your ears, make sure to lower the volume completely.
Headset usage at high volumes for extended periods of time may result in permanent hearing damage.
If the volume is raised too high, there may be sudden loud noises that may damage your ears.
Each button function can be changed using the TAC Software.
Buttons marked with ★ in "Part names" can be assigned
Button functions that can be assigned
PlayStation®4 | ![]() ![]() ![]() | |
Analog Stick | ![]() | |
Left analog stick | ![]() | |
Right analog stick | ![]() | |
PlayStation®3 | ○, ×, △, □, L1, R1, L2, R2, L3, R3, START, Walk, Quick, Snipe, FN, NC(No function) | |
Analog Stick | ![]() | |
Left analog stick | ![]() | |
Right analog stick | ![]() | |
PC(Gamepad mode) | A, B, X, Y, LB, RB, LT, RT, LSB, RSB, START, Walk, Quick, Snipe, FN, NC(No function) | |
Directional Pad | ![]() | |
Left analog stick | ![]() | |
Right analog stick | ![]() |
PC(Keyboard mode)
Alphabet | A~Z |
Number | 0~9 |
Function | F1~F12 |
Special key | Esc, Tab, Caps Lock, Shift, Ctrl, Alt, Space, Enter, Back Space, Delete |
Analog Stick | ![]() |
Other | Print Screen, Scroll Lock, Pause/Break, Insert, Home, Delete, End, Page Up, Page Down |
Numeric keypad | Num Lock, Num/, Num*, Num-, Num+, Num Enter, Num., Num0~Num9 |
Original | NC (No function), FN |
Mouse function | Right Mouse Button, Left Mouse Button, Scroll Wheel, Forward, Back, Scroll up, Scroll down |
Button layouts for the PlayStation®4, PlayStation®3 and PC
(Gamepad mode, Keyboard mode) can be saved to 8 different profiles.
Profiles can easily be switched.
The FN button function will also work even if it is assigned to another button.
Profile | How to set | Profile LED |
1 | FN Button + ![]() | Lights off |
2 | FN Button + ![]() | Green |
3 | FN Button + ![]() | Yellow |
4 | FN Button + ![]() | Red |
5 | FN Button + ![]() | Purple |
6 | FN Button + ![]() | Blue |
7 | FN Button + ![]() | Light blue |
8 | FN Button + ![]() | White |
Mouse sensitivity can be adjusted with 4 increments.
<How to set>
Press the (+) button to increase or (-) to decrease dpi.
The function of the Analog Stick and Direction Keys are switched as below while the FN Key is held down.
Pressing the quick button maximizes mouse output value.
Movement of the mouse translates to maximum lateral movement of the first person view.
Select from 4 settings within the TAC Software to adjust maximum movement speed.
Pressing the left analog stick ekys while holding the Walk button is similar to slightly tilting the left analogstick of a conventional controller,
Sensitivity can be adjusted using the TAC software
Hold the Snipe Button to temporarily reduce mouse sensitivity for increased accuracy.
Sensitivity can be adjusted using the TAC software.
This product features DUALSHOCK®4 Touchpad functionality.
The area of the touch pad is as shown below.
How to reset to default settings (all profiles)
Resets each button and each sensitivity setting to its default state in all profiles.
<How to switch>
HORI Device Manager
System Requirements
<How to download>
For iOS
For Android
*Make sure the developer is "HORI CO., LTD."
*Make sure Bluetooth on your equipment is turned on. Press "Allow" when prompted access to location, photo, media, file. Pairing is completed by press "Search" and touching the item found online.
The following functions can be set using the TAC Software.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download HORI Tactical Assault Commander K2 (PS4-124) - Keypad for PlayStation 5/4 & PC Manual
Advertisement
Need help?
Do you have a question about the Tactical Assault Commander K2 and is the answer not in the manual?
Questions and answers