In this package ��������������������������������������������������������������������������������������������������� 8 Cleaning/Decontamination ������������������������������������������������������������������������������ 9 Disposal ��������������������������������������������������������������������������������������������������������������� 9 Warranty ������������������������������������������������������������������������������������������������������������� 9 Technical specifications ������������������������������������������������������������ 10 Setup and installation ��������������������������������������������������������������� 11 How to use the Mabtech IRIS FluoroSpot/ELISpot reader Service, maintenance, and transport �������������������������������������� 16 To replace the fuses ����������������������������������������������������������������������������������������� 17...
Introduction Intended use Mabtech IRIS™: Detection of secreting cells in ELISpot and FluoroSpot assay� For research use only� Symbols Labels These symbols are shown on the reader: Machine label: Symbols Description Complies with the directives listed under “Regulatory information” Serial number...
Regulatory information The Mabtech IRIS FluoroSpot/ELISpot reader complies with the following directives: Directive Applied standards CE mark for the European Economic Area (EEA) • 2014/30/EU – Electromagnetic EN 61326-1, edition 3:2013-01-11 • Compatibility Directive (EMC) EN 61326-2-6, edition 2:2013-05-03 •...
particular installation� If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •...
Do not remove the cover of the reader� Injury to eyes from UV light can result� All internal service and maintenance work must be done by an approved technician� Contact Mabtech for more information� Warning! Do not keep or use flammable or non-flammable liquids near the system.
Page 7
Warning! Connect all cables correctly when you install the system� Risk of electrical shock� Warning! To disconnect power, unplug either end of the power cable� Place the reader so that the plug can be easily separated from the wall socket� Caution! Only use the microtiter plate types specified under “Technical specifications.”...
Door to plate loader IEC inlet with fuse holder Programming switch* *Programming switch should be set downwards In this package The following parts are included in the package: • Mabtech IRIS FluoroSpot/ELISpot reader • USB cable • Ethernet cable •...
Warning! The instrument may not be used with biohazardous substances� Please note that Mabtech cannot accept any instrument or parts that may be contaminated with biohazardous substances such as viable biological agents, harmful quantities of chemicals, or radioactive materials.
Resolution (H × W) 2048 × 2048 pixels Approved plate types 96-well filter plates with 0.45 µm PVDF membrane: IPFL, MSIP, or MAIPSWU10 (with an adapter) The Mabtech IRIS FluoroSpot/ELISpot reader must be connected to a computer equipped with the Mabtech Apex -software�...
Risk of malfunction caused by overheating� Note: Keep the packaging in case the system needs to be sent back to Mabtech for service� Place the Mabtech IRIS FluoroSpot/ Lift the Mabtech IRIS FluoroSpot/ ELISpot reader upright on a solid table�...
Page 12
Warning! Do not connect faulty equipment to the system� Risk of electrical shock and damage to the system� Caution! Connect the Mabtech IRIS FluoroSpot/ELISpot reader to a grounded outlet� The input voltage must be between 100-240 VAC, 50-60 Hz� Note:...
Page 13
Push the power button to turn on the Mabtech IRIS FluoroSpot/ELISpot reader�...
How to use the Mabtech IRIS FluoroSpot/ ELISpot reader Start the computer and double-click on the program symbol� The login screen is shown� Select a profile and enter your password. Click Login� Double-click on the type of assay you wish to run�...
Page 15
Put the microtiter plate in the plate loader and secure the plate using the manual lock system� , click Read� The reader retracts the plate loader� The microtiter In Mabtech Apex plate is read and the spots are counted� Click Save and select a folder� Click Save�...
• Fuses x 2 Cartridge fuses SP 5×20 • 250V 4A • IEC 60127-2 • Quick-Acting F, H (H = High Breaking Capacity (Ceramic Tube)) Note: All components in Mabtech IRIS™ are compliant with RoHS(Restriction of Hazardous Substances Directive, 2011/65/EU)�...
To replace the fuses Warning! Disconnect the power before replacing the fuses� Risk of electrical shock� Pull out the power cable from the IEC inlet� Remove the fuse holder from the IEC inlet with a flat screwdriver or similar tool. Replace the fuses�...
Page 20
Quality management systems ISO 9001:2015 & ISO 13485:2016. The products are for research use only. MABTECH shall not be liable for the use or handling of the product or for consequential, special, indirect or incidental damages there from. Mabtech AB (Head Office) Mabtech, Inc.
Need help?
Do you have a question about the IRIS FluoroSpot reader and is the answer not in the manual?
Questions and answers