34925T-002 Terminal Block For One-Wire Mode - Keysight 34922A User Manual

34925T-002 Terminal Block for One-Wire Mode

This terminal block with screw-type connections is labeled with the model number
and the abbreviated module name. In addition, space is available on the label for
you to write the slot number.
All modules that connect to the internal DMM are interlock protected. This
NOTE
means that when an installed module is exposed (no terminal block or cable is
connected), the Analog Bus relays are open and disconnected from the Analog
Buses. See
If you are using an Keysight terminal block to connect your DUT to this module
NOTE
be sure to use the 34925T-002 terminal block that corresponds to the 1-wire
configuration mode. An error will not be generated if you have installed a
terminal block that doesn't match the present module configuration.
Keysight 34921A-34925A User's Guide
"Safety Interlock" on page 19 for further information.
83