Page 1
98-0060-0187-3/2 8511CN Respirator P95 User Instructions Insert Activity Summary Initials Date Comments 8/2011 Initial submission 3/2020 Update GB2626 to 2019. Add clarification re: sandblasting...
Page 2
8511CN Particulate Respirator N95 User Instructions (Keep these User Instructions for reference) This respirator has dual approval as a United States (US) National Institute for Occupational Safety and Health (NIOSH) N95 particulate respirator and as a China GB2626-2019 KN95 particulate respirator.
Liquid or non-oil based particles from sprays that do not also emit oil aerosols or vapors. For additional information on 3M use recommendations for this class of respirator please consult the 3M PSD web site at www.3M.com.cn/PPE or call 86-21-22105335 in China.
substance specific standards. In Canada, CSA standard Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. ** ** For Use in China: For the selection, use and maintenance of respirator, please refer to China national standard GB/T 18664. 3.
Storage Conditions and Shelf Life Before use, store respirators in the original packaging, away from contaminated areas, dust, sunlight, extreme temperatures, excessive moisture and damaging chemicals. When stored in accordance with temperature and , the product may be used until the “use by” date specified on humidity conditions specified below packaging.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 1. Cup the respirator in your hand, with the nosepiece at your fingertips, allowing the headbands to hang freely below your hand (Fig. 1). 2. Position the respirator under your chin with the nosepiece up. Pull the top strap over your head resting it high at the top back of your head.
Page 7
See step 2 of Fitting Instructions and cup respirator in hand to maintain position on face. Pull bottom strap over head. Still holding respirator in position, pull top strap over head and remove respirator. This respirator contains no components made from natural rubber latex.
Need help?
Do you have a question about the 8511CN and is the answer not in the manual?
Questions and answers