Keep- ing loose objects, clothing and hair away from moving parts helps to prevent injury. It is important to know the DCD Vortex Mini fully prior to operation. Failure to properly operate To avoid accidentally starting machine, insure machine may result in electric shock, serious the power switch is in the OFF position.
3. Set drill to ¼ of maximum clutch setting – DO In order to prevent serious personal injury and/or NOT USE HAMMER DRILL SETTING. death, proper assembly of the DCD Valor Votex Mini is required. The following assembly procedures should be followed.
Lay machine on back and feed rest of cable into the drum. Note: cable should feed in a counterclockwise spiral. 8. Attach necessary chain knocker and operate. DRAINCABLES DIRECT (DCD), A McAlear Group Company...
DCD will then advise on where to take or send equipment for servicing. If the defect is covered by warranty and is within warranty period, DCD will repair or replace, at its option, the defective equipment, at no charge for labor or materials.
Page 7
Valor VORTEX MINI OWNER’S MANUAL NOTES: DRAINCABLES DIRECT (DCD), A McAlear Group Company...
Need help?
Do you have a question about the VALOR VORTEX MINI and is the answer not in the manual?
Questions and answers