Attaching The Crane Lifting Eye Kit - Armorgard siteboss cabinet SB48 Operational And Maintenance Manual

Attaching the crane lifting eye kit

(optional extra)
1.
For the SiteBoss Cabinets that can
be attached with crane lifting eyes,
use a 13/32" metal drill bit to drill out
the four pilot holes located on each
side of your SiteBoss Cabinet.
3.
Always check the working load limit
of the product before carrying out
a lift.
Before lifting, a risk assessment must be performed by a qualified person to ensure the
product is safe to lift.
2.
Thread the coach bolts through the
lifting eyes, then back through the
unit. Inside the unit, add a
backing plate, washers and nylocks
to each bolt as shown.
Video: how to attach
the crane lifting eyes
17