Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Lippert Components OneControl Touch Panel 3.0 OCTP
Summary of Contents for Lippert Components OneControl Touch Panel 3.0 OCTP
- Page 1 OneControl ® Touch Panel 3.0 OCTP Software V5 OWNER'S MANUAL...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Introduction Safety Preparation Operation Power On/Off Navigating The Screen Settings Setting Favorites Change Settings Troubleshooting Introduction The OneControl® Touch Panel (OCTP) is a touchscreen device that provides system controls and monitoring software for the recreational vehicle. The systems include slide-outs, leveling systems, awnings, lighting, temperature, water tanks, battery levels and any other compatible systems installed on the unit and programmed into the OneControl®... -
Page 3: Safety
Safety Read and understand all instructions before installing or operating this product. Adhere to all safety labels. This manual provides general instructions. Many variables can change the circumstances of the instructions, i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This manual cannot begin to plot out instructions for every possibility, but provides the general instructions, as necessary, for effectively interfacing with the device, product or system. -
Page 4: Operation
Operation The OneControl Touch Panel (OCTP) uses a touch screen (Fig. 1) as the input device to interface with the Lippert CAN bus system. This manual will cover all possible operation and controls of the OCTP, but not all units will have the same control or systems monitoring. - Page 5 After a few seconds, a screen will be shown (Fig. 2) with a choice for Power Off (Fig. 2A) or Restart (Fig. 2B). Tap Power off to completely power down the OCTP. It will remain off until the power button (Fig. 1A) is used to turn it back on.
-
Page 6: Navigating The Screen
Navigating The Screen The main screen is split into two sections, left side and right side (Fig. 3). NOTE: Functions and devices shown will vary depending on the components installed in the unit. The left side of the main screen (Fig. 3) will show functions and information that are frequently used and monitored. - Page 7 Tap ALL DEVICES (Fig. 4A) to show all controls. Lighting devices are shown first. To turn on the device, tap the slider button (Fig. 4B). Tap it again to turn it off. < > Tap the icons (Fig. 4C) at the bottom to view the other light group selections if necessary. |<...
-
Page 8: Settings
Settings Setting Favorites > Tap the icon (Fig. 5A) to open the individual control for the device. Tap the Favorite Device heart icon (Fig. 6A). The heart icon will turn solid in color (Fig. 7A) and the selected device will now be shown as a favorite device. -
Page 9: Change Settings
Change Settings Tap the gear icon (Fig. 5B) at the top of the screen. Diagnostics - App Version: Option for System Report and a snapshot summary of all available devices connected to the system. Resync - removes "off-line" devices. This option is used to resync the system devices after one has been removed, serviced or repaired and shown to be off-line. - Page 10 The contents of this manual are proprietary and copyright protected by Lippert. Lippert prohibits the copying or dissemination of portions of this manual unless prior written consent from an authorized Lippert representative has been provided. Any unauthorized use shall void any applicable warranty. The information contained in this manual is subject to change without notice and at the sole discretion of Lippert. ...
Need help?
Do you have a question about the OneControl Touch Panel 3.0 OCTP and is the answer not in the manual?
Questions and answers