Do you have a question about the Blue Pure 211i + Max and is the answer not in the manual?
Questions and answers
Saltsman
February 20, 2025
What is recommended pm setting
1 comments:
Mr. Anderson
February 20, 2025
The recommended PM setting for the Blue Pure 211i Max is "Auto mode," which automatically adjusts the fan speed based on indoor PM levels to ensure optimal air quality.
This answer is automatically generated
Debbie CASALEGNO
February 22, 2025
What do the numbers mean on top in the middle
1 comments:
Debbie CASALEGNO
February 22, 2025
What do the numbers on the top of the machine mean?
Pat
March 17, 2025
How to reset a new filter
1 comments:
Mr. Anderson
March 17, 2025
To reset the filter on a Blueair Blue Pure 211i Max, hold the fan button for 15 seconds. This will reset the filter change counter.
This answer is automatically generated
cindy
April 13, 2025
What do the three digit numbers mean on the display
1 comments:
Mr. Anderson
April 13, 2025
The three-digit numbers on the display of the Blueair Blue Pure 211i Max indicate the PM (particulate matter) levels in the air, such as PM 1, PM 2.5, or PM 10. These numbers show the concentration of fine particles in the air.
This answer is automatically generated
Charles b hall
April 16, 2025
I haven’t received an operating Manuel in english
1 comments:
Mr. Anderson
April 16, 2025
The operating manual in English for the Blueair Blue Pure 211i Max can be found in the section titled "Blueair Blue Pure 211i Max - Air Purifier Manual" under "Safety information".
Blue Pure 211i + Max 3613111100 Blue Pure 211i + Max air purifier is electrical appliance for indoor use only. Take the necessary precautions to reduce the risk of fire, electric shock or injury. This appliance is not intended for use by persons (including children) with reduced physical,...
Page 3
When disconnecting the unit from the power supply, do not pull on the power cord, pull on the power plug. Use the power cable provided with your Blueair air purifier to plug directly and firmly into an appropriate, electrical outlet.
Regulatory information WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Product map User interface Fan motor Washable fabric pre-filter Air outlet Silencer Air quality indicator (AQI) Particle & carbon filter Air quality status The air purifier has a particle sensor to measure the fine particles (PM 1, PM 2.5 and PM 10) levels. The LED indicator displays air quality status in 5 colors from excellent (blue) to very polluted (red).
Fan speed levels which the fan speed based fully dimmed lights. you can manually set on your indoor PM by pressing the Fan levels to ensure Speed button on the optimal air quality. interface or adjust via Recommended setting. Blueair app.
Page 7
How to use tips Change brightness Step 1 Enable/disable Child lock Press the Fan Speed button and On/ Long press On/Standby button for Standby button at the same time. about 5 seconds (until all the LEDs Hold for three seconds. of the interface light up and blink once).
Page 8
Connect to the Blueair app Connecting to the Blueair app allows you to control the air purifier remotely and monitor filter usage. The app offers additional functions to the air purifier. Step 1 Step 2 Step 3 Download the Blueair app from Open the app.
Maintenance information Important! Turn the air purifier off and disconnect the air purifier from the power supply before maintenance. Changing your filter When your air purifier’s indicator light turns red, it’s time to change the main filter. This will occur some time between 6 and 9 months of operation, depending on usage and your air quality conditions.
Page 10
Cleaning your washable pre-filter Clean your pre-filter regularly when you see dust or dirt. Vacuum the exterior of the fabric with a soft brush attachment. If the pre-filter requires a deeper clean, wash according to the instructions on the pre-filter´s label. Hang to dry.
3. Reconnect the power cable. 4. Press the power button If the air quality does not improve with the use of the air purif ier and with ventilation, please contact us. For more information and troubleshooting tips, please check the Support page on www.blueair.com...
Page 12
Blueair Inc. 125 S Clark, Suite 2000, Chicago, IL, 60603 USA Tel: +1 888 258 3247 info@blueair.com...
Need help?
Do you have a question about the Blue Pure 211i + Max and is the answer not in the manual?
Questions and answers
What is recommended pm setting
The recommended PM setting for the Blue Pure 211i Max is "Auto mode," which automatically adjusts the fan speed based on indoor PM levels to ensure optimal air quality.
This answer is automatically generated
What do the numbers mean on top in the middle
What do the numbers on the top of the machine mean?
How to reset a new filter
To reset the filter on a Blueair Blue Pure 211i Max, hold the fan button for 15 seconds. This will reset the filter change counter.
This answer is automatically generated
What do the three digit numbers mean on the display
The three-digit numbers on the display of the Blueair Blue Pure 211i Max indicate the PM (particulate matter) levels in the air, such as PM 1, PM 2.5, or PM 10. These numbers show the concentration of fine particles in the air.
This answer is automatically generated
I haven’t received an operating Manuel in english
The operating manual in English for the Blueair Blue Pure 211i Max can be found in the section titled "Blueair Blue Pure 211i Max - Air Purifier Manual" under "Safety information".
This answer is automatically generated
How do you clean the sensors?