Byron BY206 - Wirefree Portable Doorchime Kit Manual

Installing the push batteries

PORTABLE UNIT

Remove the battery cover of the Door Chime. Insert 3 X 1.5V Size 'AA' batteries. Make sure the Positive/Negative terminals match the internal markings. Chime will 'Beep' on Start up. Replace the battery cover

NOT WORKING....TRY A FACTORY RESET

Press and hold the 'VOL' button on your Door Chime, until the Chime goes 'Beep Beep' (6 Seconds). Release the 'VOL' button. Re-press and hold the 'VOL' button on your Door Chime, until the Chime goes 'Beep' (6 Seconds). The Chime is now reset. > 3

POSITIONING YOUR CHIME

Test the Chime in the intended location, as internal walls and surfaces may reduce operating range. DO NOT mount onto metallic surfaces.

MELODY SELECTION

Remove the back plate from the bell push
Press the melody select button. The chime will play the newly selected sound. Press again to select the next melody.

VOLUME SELECTION

To select the chime volume level, press the 'VOL' button on the chime there are 4 selectable volume levels, the door chime is pre-set to the loudest volume setting.

Mounting the bell push

Optional

Changing batteries

ATTENTION:
Avoid positioning the Bell Push/Chime on or directly near metallic surfaces as this may reduce the operation range.
UPVC Door Frames:
When positioning the bell push onto a UPVC door, always check the operating performance before final installation, internal metal frame of the door may affect performance.
Tip: Try adjusting the location of the Bell Push slightly to the Left/Right or place on an external wall.
Note: the appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction. Children should be supervised to ensure that they do not play with the appliance.

TROUBLE SHOOTING

In case of the door chime does not sound, please check the followings:

Type R2 Device - device where the sound output is created by the initial operation of the control and where the period of sound output continues for the designed duration irrespective of condition of the control.

There are no serviceable parts, do not repair. The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Children should be supervised to ensure that they do not play with the appliance.

SPECIFICATION

Bell Push: BY30
Power: 1 x CR2032 3V DC Battery (Included)
IP44 - Splash proof
Portable Door Chime: BY206
Power: 3 x 'AA'/LR6 1.5V DC, total
4.5V DC Batteries (not included)
Range: 125 Metres Indoor Use Only

Conforms to all relevant European Directives.
Smartwares Safety & Lighting declares that the appliance, model [BY206], complies with the main essential requirements of the R&TTE directive, 1999/5/CE. The complete declaration of conformity is available on request at:

This symbol is known as the 'Crossed-out Wheelie Bin Symbol'. When this symbol is marked on a product or battery, it means that it should not be disposed of with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and the environment. Only dispose of electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained within. Your co-operation is vital to ensure the success of these schemes and for the protection of the environment
Smartwares declares that this appliance complies with the main essential requirements of the R&TTE directive, 1999/5/CE. The complete declaration of conformity is available on request at:

433.92MHz