GIMPRO MS1(A) User Manual

MS1(A)/(C)
Wireless Phone Microphone
Thank you for choosing GIMPRO product. Please read this manual carefully before use and
follow all instructions mentioned herein.
Caring For Your Product
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to prevent
mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any malfunctions
happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
Package List
User Manual
TX Transmitter x1 RX Receiver(Type-C or Type-C to USB Adapter
Lightning Connector) x1 [Only for MS1(C)] x1
Product Introduction
Clip x1 Charging Cable x1
Windshield
Transmitter Indicator
Type-C Charging Port
Clip
Switch Key
Carrying Bag x1
Indicator- TX Transmitter
Function /
Status
Power on
Power off
Charging
Pairing
Paired
Voltage lower
than 3.4V
Voltage lower
than 3.3V
Indicator- RX Receiver
Function /
Status
Phone Connector (Type-C or Lightning)
Power on
Receiver Indicator
Power off
Type-C or Lightning Port
Pairing
Paired
Light
The red and white indicator flashes alternatively.
The red indicator flashes twice.
The red indicator is on and is off when it is full charge.
The red and white indicator flashes alternatively.
The white indicator is on.
The red indicator flashes or is on.
The indicator is off.
Light
The red and white indicator flashes alternatively.
The indicator is off.
The red and white indicator flashes alternatively.
The white indicator is on.