Table of Contents
Advertisement
EpsonNet Config for Windows
About EpsonNet Config for Windows
EpsonNet Config for Windows is a Windows-based configuration
software for administrators to configure the network interface for
TCP/IP, NetWare, MS Network, AppleTalk, SNMP, and IPP.
Note:
❏ Be sure to use EpsonNet Config included on the Software CD-ROM
shipped with this product.
❏ EpsonNet Config installed on Windows XP/Server 2003 does not
support NetBEUI as a search protocol because officially the
NetBEUI protocol is not supported on Windows XP/Server 2003.
❏ If you are using the device in a dial-up environment not running
NetWare, clear the Use NetWare check box on the NetWare
screen. If this check box is selected, the extra account may be charged
when you use the dial-up router.
❏ When configuring the network interface for NetWare, use the IPX
protocol and log in to the NetWare server or the NDS context with
supervisor privileges.
❏ When you configure the network interface for NetWare 5.x, you
must log in to the NetWare server using an IPX connection. If you
log in to the NetWare server using an IP connection, the NetWare
screen and the IPX trap setting of SNMP are not available.
Chapter 2 About the Software
C h a p t e r 2
91
Advertisement
Table of Contents
