Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Lisle Digidown
Summary of Contents for Lisle Digidown
- Page 1 Digital Tachograph Download Device Operating Instructions...
- Page 2 Digidown. To insert the card, push it into the slot in the end of the Digidown until it latches in place. To remove the SD card from the Digidown (for instance in order to read it using a different memory card reader) the protruding end of the memory card should be pushed back into the Digidown.
- Page 3 Doing so may cause file errors on the SD card. Reading the SD card The SD card can be read via the USB port on the Digidown. Once connected to a PC via the USB port, the Digidown will appear as a...
- Page 4 Single LED permanently on Indicates download failure Single LED on briefly (approx 3s) Indicates button press while Digidown is busy Suggested Actions on Error Condition SD Card Error: Check card is correctly inserted Check card Lock Switch is in the unlocked position...
- Page 5 FAT16 (which Windows calls ‘FAT’). When a newly formatted SD card is inserted into a Digidown or Digidown Plus and the unit is connected to a VU, the format of the memory card is first checked. The Digidown then creates a directory structure on the card.
- Page 6 SD Card directory structure The downloaded data appears on the SD card in the ‘\digidown\vu’ or ‘\digidown\card’ directory depending on download type. Each download is labelled vuxxxxxx.esm or cdxxxxxx.crd where xxxxxx is a number starting at 000001 and increasing by 1 for each download recorded on the SD card.
Need help?
Do you have a question about the Digidown and is the answer not in the manual?
Questions and answers