Table of Contents
Advertisement
KX-TG1061M/KX-TG1062M/KX-TGA106M
9.1.4.3.
Check Table for RF part
No.
Item
1
Link Confirmation Normal
2
Control signal confirmation
3
X'tal Frequency confirmation
4
Range Confirmation Normal
Note:
(*1) Refer to Registering a Cordless Handset to a Base Unit (P.27)
(*2) Refer to Adjustment Standard (Base Unit) (P.67)
(*3) Refer to Adjustment Standard (Cordless Handset) (P.71)
9.1.5.
Check Cordless Handset Transmis-
sion
Cross Reference:
Signal Route (P.16)
9.1.6.
Check Cordless Handset Reception
Cross Reference:
How to Check the Cordless Handset Speaker or Receiver (P.75).
Signal Route (P.16)
9.1.7.
Check Caller ID
Cross Reference:
Signal Route (P.16)
BU (Base Unit) Check
1. Register Regular CH to BU (to be
checked). (*1)
2. Press [Talk] key of the Regular HS to
establish link.
1. Check BBIC interface.
1. Check X'tal Frequency. (*2)
(10.368 MHz ± 100 Hz)
1. Register Regular CH to BU (to be
checked). (*1)
2. Press [Talk] key of the Regular CH to
establish link.
3. Compare the range of the BU (being
checked) with that of the Regular BU.
48
CH (Cordless Handset) Check
1. Register CH (to be checked) to Regular
BU. (*1)
2. Press [Talk] key of the CH to establish link.
1. Check BBIC interface.
1. Check X'tal Frequency. (*3)
(10.368 MHz ±100 Hz)
1. Register CH (to be checked) to Regular
BU. (*1)
2. Press [Talk] key of the CH to establish link.
3. Compare the range of the CH (being
checked) with that of the Regular CH.
Advertisement
Table of Contents
Troubleshooting
