Sanyo DP50741 Setup Manual page 2

Connect the AC cord to the HDTV and to power outlet.
Use the POWER key to turn on your HDTV.
Use the on-screen menu to select your HDTV's location.
Use the on-screen menu to select your HDTV's location.
Use the CURSOR
Use the CURSOR keys to highlight the desired option and press keys to highlight the desired option and press
the ENTER key.
the ENTER key.
NOTE: Selecting Home mode will qualify as an Energy Star rating. NOTE: Selecting Home mode will qualify as an Energy Star rating.
Please select the proper location for your TV,
the display will be adjusted for best results.
STORE STORE
Use keys to highlight your choice and then press ENTER key.
Perform a Signal search.
Perform a Signal search.
Use the CURSOR Use the CURSOR keys to highlight the Signal Search option and
keys to highlight the Signal Search option and
press the ENTER key. press the ENTER key.
Please allow the HDTV a few minutes to complete the process.
Please allow the HDTV a few minutes to complete the process.
Please connect all antennas* and signals to the jacks and terminals.
Make sure all of your equipment is switched on.
Signal search
Skip
*To avoid signal interference when searching for channels using
an Indoor Antenna, place the antenna at least 3 feet away from TV.
Use keys to highlight your choice and then press ENTER key.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
ECO AUDIO ON TIMER
CAPTION RESET SLEEP
Store mode is for the
Store
retail display setup.
Home Mode is for saving
energy and reducing power
Home
consumption, this setting
qualifies for ENERGY STAR.
Finalize the completed Setup process.
Finalize the completed Setup process.
Use the CURSOR
Use the CURSOR keys to highlight the Finish Setup option and keys to highlight the Finish Setup option and
press the ENTER key.
press the ENTER key.
You can now watch and enjoy TV programming on your HDTV! You can now watch and enjoy TV programming on your HDTV!
Analog Channels...16
Video 1...Yes
Video 2...no
Video 3...no
The search was successfully completed!
Finish Setup
Repeat
If you are having problems, call us toll-free at 1-800-877-5032
Use keys to highlight your choice and then press ENTER key.
Choose the correct Input source
Choose the correct Input source
Use the INPUT key on your remote control to select
Use the INPUT key on your remote control to select
from the available Input sources on your HDTV.
from the available Input sources on your HDTV.
NOTE: If you receive Satellite or Cable service through a
NOTE: If you receive Satellite or Cable service through a
set top box, tune to the correct input on your HDTV and
set top box, tune to the correct input on your HDTV and
use the receiver and its remote for channel viewing.
use the receiver and its remote for channel viewing.
Si necesita ayuda en ESPAÑOL, marque al 1-800-877-5032 y un asesor Si necesita ayuda en ESPAÑOL, marque al 1-800-877-5032 y un asesor
estará dispuesto a ofrecerle ayuda con cualquiera de sus dudas. estará dispuesto a ofrecerle ayuda con cualquiera de sus dudas.
Use the following codes to program your cable or satellite provider's Use the following codes to program your cable or satellite provider's
remote control to work with your new HDTV. remote control to work with your new HDTV.
Direct TV 10154, 960
(to activate INPUT feature)
Dish Network 590, 683, 589, 542, 652
Comcast 10154
Cox 0154, 0088
Verizon 0181, 0826, 0920
ATT 1045, 1062, 1095, 1380
NOTE: If these do not work, refer
NOTE: If these do not work, refer
to your Cable or Satellite manual.
to your Cable or Satellite manual.
Digital Channels...24
HDMI 1...Yes
HDMI 2...no
ECO AUDIO ON TIMER
CAPTION RESET SLEEP