Ifor Williams Trailers EasyLoad TA5 Operating Instructions

Ifor Williams Trailers EasyLoad TA5 Operating Instructions

Rear ramp system with easylift collapsible deck & rear barrier

Advertisement

Quick Links

C95040 Issue 2 Jan 2007
EasyLoad System
4
OPERATING INSTRUCTIONS
TM
EasyLoad
Rear ramp system with
TM
EasyLift
Collapsible deck & rear barrier
FOR TA5, TA510 and DP120 MODELS
These instructions are provided to help you to get the best possible service from your
trailer. To ensure that the trailer is used safely, we strongly recommend that the instruc-
tions are read by all users and all the recommendations followed. This also applies to
the main user handbook.
Misuse may invalidate warranty
IMPORTANT
If you sell your trailer, please pass on this booklet as well as the main user handbook
to the new owner
BRITAIN' S LEADING TRAILER
MANUFACTURER
FM 13224
FM13224

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EasyLoad TA5 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ifor Williams Trailers EasyLoad TA5

  • Page 1 C95040 Issue 2 Jan 2007 EasyLoad System OPERATING INSTRUCTIONS EasyLoad Rear ramp system with EasyLift Collapsible deck & rear barrier FOR TA5, TA510 and DP120 MODELS These instructions are provided to help you to get the best possible service from your trailer.
  • Page 2 EasyLoad System INTRODUCTION TO THE EasyLoad and EasyLift SYSTEMS Unique to Ifor Williams the factory fitted EasyLoad ramp and EasyLift barrier system greatly simplifies the loading of the upper deck without the need to manhandle ramps or livestock. With the deck system folded away the trailer is suitable for use with cattle and other livestock. In this configuration the EasyLoad ramp is used in the same manner as a conventional loading ramp.
  • Page 3 EasyLoad System RAMP SIDE GATES The ramp side gate assemblies should now both be opened. Starting with the right hand gate, lift it upward (to disengage it from the clip) and then swing it outwards and down to adjust the gate to match the ramp angle. The side gate locating peg should be inserted into the corresponding slot on the outside edge of the ramp, the second gate can now be opened and positioned in its slot.
  • Page 4 Whilst every care is taken to ensure that the information in this manual is correct, no liability can be accepted for any loss, damage or injury caused by any errors in, or omissions from, the information given. Ifor Williams Trailers Ltd., Cynwyd, Corwen, Denbighshire, LL21 0LB, UK...

This manual is also suitable for:

Easyload ta510Easyload dp120

Table of Contents