Toshiba CC-Link TOSVERT VF-S11 Option Instruction Manual page 4

Wiring
▼ Turn off input power before installing and wiring this option.
Wait at least 10 minutes and check to make sure that the charge lamp (VF-S11) is no
longer lit.
Mandatory
▼ Tighten the screws on the terminal block to the specified torque
(Refer to Section 3.2 and 3.3).
If the screws are not tightened to the specified torque, it may lead to fire.
▼ Electrical construction work must be done by a qualified expert.
Installation or connection of input power by someone who does not have that expert
knowledge may lead to fire or electric shocks.
Operations
▼ Do not touch switches when the hands are wet and do not try to clean the inverter
with a wet cloth.
It may lead to electric shocks.
Prohibited
▼ Do not pull on any cable itself.
It may lead to damage or malfunction.
Disposal
▼ For safety's sake, do not dispose of the disused inverter yourself but ask an industrial
waste disposal agent (*).
If the collection, transport and disposal of industrial waste is done by someone who is
Mandatory
not licensed for that job, it is a punishable violation of the law. (Laws in regard to
cleaning and processing of waste materials)
(*) Persons who specialize in the processing of waste and known as "industrial waste
product collectors and transporters" or "industrial waste disposal persons."
Notes on use
▼ Avoid installing in a place where ambient temperature or/and humidity change sharply.
▼ Keep the communication cable separate and from the power cable of the inverter to
prevent the inverter from malfunctioning due to electromagnetic noise.
Please make grounding of a network SLD terminal different from grounding an inverter
▼
and a motor. It becomes the cause of the malfunction by the noise.
▼ Insert a magnetic contactor or similar device between the inverter and the power
supply to ensure that power is turned off if an emergency stop command is entered
through the externally.
Warning
Warning
Caution
Notes
－ 3 －
E6581422③