Checking The Signal Strength; Making A Test Call - Nokia 22 User Manual

53068en_1.fm Page 9 Tuesday, March 20, 2001 2:30 PM
G e t t i n g S t a r t e d
If the AutoPIN feature is active, the terminal automatically enters your
PIN code the next time the power is switched on.

Checking the signal strength

To check the signal strength, lift the receiver of the telephone connected
to the terminal and key in 777**. The signal strength should be at least -
95 dBm. The signal strength is indicated by the light indicators for
aproximately one minute (see Light Indicators on page 11).

Making a test call

Make the test call using the telephone connected to the terminal. To
adjust the volume, key in 0**x during the call. The 'x' represents a value
ranging from 1 (the lowest volume level) to 10 (the highest volume
level).
9