Woodbridge B0930S Installation Manual page 20

WOODBRIDGE
Knob
definition
Knob
function
In the seated state, turn the knob clockwise to start the feminine wash
function, and turn it counterclockwise to start the rear wash function.
After the first cleaning function (rear wash /front wash) is completed
or short press the knob during the cleaning function, the warm air
Rear wash/
function and flushing function will be automatically activated.
front wash
In the same seating situation, after using the knob to start the cleaning
function again, short press the knob during the cleaning function, the
warm air function will be automatically started, and the flushing
function will not be turned on.
When rear/front washing, turn the knob clockwise to move the nozzle
Nozzle position
position forward, and turn the knob counterclockwise to move the
adjustment and
nozzle position backward.
cleaning water
Long press the knob to switch to water pressure adjustment, turn
pressure
clockwise to increase the water pressure, counterclockwise to
adjustment
decrease the water pressure, long press the knob again to switch to
nozzle position adjustment.
In the warm air state, turn the knob clockwise to increase the air
temperature level, and turn the knob counterclockwise to decrease
the air temperature level; for mobile dryer models, press and hold
Air flow
the knob button to switch to the air flow speed adjustment function,
temperature and
and then turn the knob clockwise The air flow speed increases, and
air flow speed
the air flow speed decreases when it is rotated counterclockwise;
adjustment
short press the knob to stop the warm air function. (Note: In the
drying function state, the mobile dryer model can switch between the
air flow speed adjustment and air temperature adjustment functions
by long pressing the knob)
In the state of leaving the seat, turn the knob clockwise to start the
nozzle manual cleaning function; short press the knob to stop the
Nozzle cleaning
manual cleaning function, and the nozzle retracts.
In normal working mode, when there is no cleaning, drying or nozzle
Flush function
cleaning function, shortly press the knob to start the flushing function.
In standby mode, press the knob to enter normal working mode.
Operating mode
In normal working mode, when leaving the seat, press and hold the
knob, the main unit enters standby mode, all functions are turned off,
Standby mode
and the indicator light goes out.
Reminder: Just after starting up, all function gears default to the middle gear; if you use the
remote control, it will switch to the function gear set by the remote control.
19
R
Anticlockwise
Push the knob
THE ILLUSTRATION OF MAIN UNIT KNOB
rotation
Clockwise
rotation