Coleman Power Steel 90469E Owner's Manual

Hide thumbs

page of 10

/ 10
Bookmarks

Quick Links

Download this manual

90469E/90444E

Power Steel™ Pools

OWNER'S MANUAL

Para la instrucción en español,

visite bestwaycorp.com/support

DO NOT RETURN THIS ITEM TO THE STORE OR

WEBSITE WHERE IT WAS PURCHASED.

PLEASE VISIT BESTWAYCORP.COM/SUPPORT

FOR QUESTIONS, OR FOR DEFECTIVE OR

WARRANTY CLAIMS.

Need help?

Do you have a question about the Power Steel 90469E and is the answer not in the manual?

Questions and answers

Summary of Contents for Coleman Power Steel 90469E

Page 1 90469E/90444E Power Steel™ Pools OWNER’S MANUAL Para la instrucción en español, visite bestwaycorp.com/support DO NOT RETURN THIS ITEM TO THE STORE OR WEBSITE WHERE IT WAS PURCHASED. PLEASE VISIT BESTWAYCORP.COM/SUPPORT FOR QUESTIONS, OR FOR DEFECTIVE OR WARRANTY CLAIMS.
Page 3 WARNING smooth out the bottom Put 1in. to 2in. water in the pool to cover the floor. Once pool floor is slightly covered, gently smooth out all wrinkles. Start in the center of the pool and work your way clockwise to the outside.
Page 4 nearest available police, fire, ambulance, and/or rescue unit. These WARNING numbers are to be kept near the telephone that is closest to the pool. Toys, chairs, tables, or similar objects that a young child could climb shall be at least 4 feet (1219 mm) from the pool. WARNING If deck is used by the installer, it will need to comply with APSP-8.
Page 5: Components List
6. The selected surface must be clear of any type of object. Due to the 26 ft. x 12 ft. x 52 in. 16 ft. x 10 ft. x 48 in. weight of the water, any object under the pool could damage or POWER (7.92 m x 3.66 m x 1.32 m) (4.88 m x 3.05 m x 1.22 m)
Page 6 2. Spread out the pool and make sure the pool is right side up; let it sit exposed to direct sunlight for 1 hour or more so that the pool is more flexible during set up. 3. Place the pool near an adequate drainage system to deal with overflow water and ensure the pool’s inlet A and outlet B are correctly positioned to allow your filter pump to connect to a power source.
Page 7 not level, the sides may burst and the water may discharge IDEAL VALUES TEST suddenly causing serious personal injury and/or damage toproperty. 3. Check pool for any leaks at valves or seams, check any evident 7.4 – 7.6 pH value water loss.
Page 8 4. Apply the repair patch to repaired site and smooth out any air ATTENTION: Do not leave the drained bubbles. Press for 30 seconds. pool outside. STORAGE 1. Please remove all the accessories and spare parts of the pool and store them clean and dry.
Page 9 4. Press the repair patch firmly to repair site for 30 seconds. 5. Wait 30 minutes before use. 30’...
Page 10 ©2021 The Coleman Company, Inc. is a registered trademark of The Coleman Company, Inc., used under license. Manufactured by ©2021 Bestway (USA) Inc. Trademarks used in some countries under license from Bestway Inflatables & Material Corp., Shanghai, China Exported by Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong www.bestwaycorp.com...

This manual is also suitable for:

Power steel 90444e