Do you have a question about the GLA-03 and is the answer not in the manual?
Questions and answers
Summary of Contents for iSens GLA-03
Page 1
The alarm is made of ABS The packing is made of PVC This product is designed to comply with the EN50194 standard. The standard describe all requirements and testing for this product. Norwegian product made by iSens AS - www.iSens.no...
GLA is not working. iSens is not responsible for any loss or damages to persons, material or otherwise resulting from gas leakage, fire and explosion.
Page 3
2. DESCRIPTION GLA is a Norwegian patent protected product for detection of heavy combustible gases such as propane and butane, as well as, and hence carbon monoxide CO from combustions indirectly. GLA is ideal for all places where gas is used; home, cabin, camping, boat etc.
Page 4
3. SAFETY The safety rules must be read before the product is installed and used. It is recommended to use at least two GLA sensors for better operation reliability. More sensors give better coverage of places where gas can accumulate, and significant increased security against sensor malfunction and empty energy source.
4. USE INSTALLATION When installing, it is important to take into account the safety points and technical data. In order to achieve the fastest possible detection of gas, the location is very important. Heavy fuel gas sink to the lowest point, also through cracking and down into cavities.
5. TECHNICAL DATA: Materials: ABS box and PVC packing Outside dimensions: 110x80x30mm Color: White with black sides and front Mounting: Silicon legs (slots for screws) Weight: Ca 100g Operation: OFF-ON switch in front Connections: None Gas types: Propane, butane and CO (CO indirect) Detection limit: 10-15% of LEL (Lower Explosion Limit)
Need help?
Do you have a question about the GLA-03 and is the answer not in the manual?
Questions and answers