Advertisement
WARNING! Mount the winch to a firm base. Be sure that your structural support is strong enough to withstand the weight and rated
‰
pulling strength of the winch.
NOTE:
Whilst mounting orientation is at your discretion, the winch is to be operated with the wire rope in an under wound orientation on
the drum. The winch is designed to rope out and rope in, in one direction. DO NOT attempt to reverse the operation of the winch.
WARNING! DO NOT weld or machine any part of the winch, this will weaken it and void the warranty.
‰
WARNING! Batteries contain explosive gases. The following precautions should be taken before making battery connections: wear
‰
eye protection; remove all jewellery; follow the wiring diagram included in the installation instructions; keep spectators away.
In the event of a battery explosion, acid should be washed away as soon as possible, seek medical help immediately.
WARNING! Use of any other accessories or attachments other than those recommended in this instruction manual may result in
‰
personal injury or property damage and could void the warranty.
NOTE:
The safety precautions and instructions discussed in this manual can't cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be
applied by the operator.
2. INTRODUCTION
Suitable for ATV mounting. 3-Stage planetary gears. 12V DC 1.2hp permanent magnet motor. Pull and turn clutch. 4-way roller fairlead for even
distribution of cable onto drum.
3. SPECIFICATION
Model No: ................................................................... ATV1000W
Supply: .................................................................................... 12V
Rated Line Pull*: .................................................. 1000kg / 2200lb
Motor Power:........................................................... 0.9kW/1.25hp
Gear Ratio: .......................................................................... 166:1
Line Speed*:
No Load: .........................................................................3.3m/min
Maximum Load: ..............................................................0.8m/min
Current Draw:
No Load: ................................................................................. 12A
Maximum Load: .....................................................................118A
Wire Rope Diameter............................................................4.8mm
Consumable Parts:
Wire Rope (Ø4.8mm x 12m) ...................................ATV1000W.26
* Performance quoted at first layer of cable on drum
4. PERFORMANCE
LINE PULL AND LINE SPEED vary according to how much cable is on the drum. The winch is rated at the first layer of cable on the
drum. The maximum line pull force will be reduced by subsequent layers of cable on the drum. Charts below illustrate the
maximum line force at increasing cable layers.
Line speed and motor current (first layer)
Line Pull
lbs
kgs
Line Speed
fpm
mpm
Motor Current Amps
© Jack Sealey Limited
fig.1
0
1000
1592
2205
0
454
722
1000
10.8
8.2
3.6
2.6
3.3
2.5
1.1
0.8
12
60
100
130
Original Language Version
fig.2
Line pull and Cable capacity
Layer of cable
Rated line pull per layer
lbs
kgs
Cable capacity per layer
ft
m
fig.3
1
2
3
4
2205
1801 1623
1482 1371
1000
817
736
672
4.9
11.5
19.3
28.5
1.5
3.5
5.9
8.7
ATV1000W
Issue 1
09/09/21
5
622
30.1
9.2
Advertisement
