2. Parameter Switching
2.1 Non-UI Mode Parameter Settings Dialog
In the mode without TWAIN user interface, the TWAIN driver operates according to the specified
values. With this tool, however, you can work with the parameters where the settings are already
saved.
Starting this tool displays the Non-UI Mode Parameter Settings Dialog as shown in Figure 2.1.
Table 2.1 Settings and Functions of the Non-UI Mode Parameter Settings Dialog
No.
Item
1
Setting Parameter
Name
2
Set
3
Delete Settings
4
Delete Parameter
File
5
Close
Changing the size and other settings from the application is disabled.
It is fixed that no automatic scanning is executed in the parameter setting.
Continuous input follows the CAP_AUTOFEED specification.
2-2
Figure 2.1 Non-UI Mode Parameter Settings Dialog
Displays the parameter name used in the mode without TWAIN
user interface.
Note: At starting, the parameter name set currently is displayed.
Sets the parameter name specified in the Parameter Name field
can be used in the mode without TWAIN user interface.
Deletes the parameter name setting.
Deletes the parameter file.
Terminates the operation.
Description