Troubleshooting - Fujitsu TeamPoS 7000 Series User Manual

This chapter provides information needed for troubleshooting and explains how to clear paper
jams. Read this chapter if you notice abnormalities with the unit.
If you suspect that the unit is faulty, contact your support department.
4.1 Trouble shooting
A symptom that appears to indicate a failure, may not actually be a failure. In such a case,
refer to the applicable part of the following table to identify the true cause of the problem.
If an error message appears on the operator display, refer to the operation manual or the
specifications of the application package being used.
Symptom
The unit cannot be turned on.
No display appears on the screen
or the screen is dark. (LCD Unit)
The speaker sound volume is too
low or no sound can be heard.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.

Troubleshooting

Common Causes
• The unit is not plugged in.
• The main circuit breaker for the
power outlet is off
• Power failure
• The brightness control is set
incorrectly.
• The speaker sound volume is
set incorrectly
Check the followings :
Check the power is turned on.
• AC outlet
• Main circuit breaker
Adjust the brightness control.
Adjust the speaker volume
control.
4
Page 24