Operation Instruction
Operation Installation
Lock Function
In the on/off-state, press "
controller enters the lock state. In this case, the LED display "
these two buttons at the same time for 5s to quit the lock state.
Notice:
In the lock state, if malfunction occur, all the buttons will be shield besides ON/OFF
button.
The Switch of Centigrade and Fahrenheit
In On/Off-state, press "
and Fahrenheit.
Defrost Function
In Heating mode, when the condition meets the standard that the outdoor unit control
system can turn on the defrost function, the units will defrost automatically, "
icon appear.
Wi-Fi Function
" and "
Press the "
On/Off
Press the "
" button to turn on or off the unit.
Mode Setting
In on-state, press the "
shown in below:
Temperature Setting
Press "
" or "
the unit. If press either of them continuously, temperature will be changed rapidly.
Temperature setting range is 20°C~25°C (68°F-77°F).
" and "
" and "
" buttons for 3s into the Wi-Fi setting.
" button to switch the operation modes as the sequence
Cooling
Dehumidification
" button to increase or decrease setting temperature in on-state of
" buttons at the same time for 5s till the wired
" button for 5s to switch between Centigrade
5
". After that, repress
DEFROST
Heating
"