Table of Contents
Advertisement
FREE WHEEL MODE
FREE WHEEL MODE
The drive system is equipped with a lever that overrides the electromechanical brake for manually operating your Overland
Cart. The brake lever allows you to override the electric brake when you need to push the cart manually, when loss of power
had occurred. With the brake in the disengaged position, the E-Stop button must be pushed in, and the power turned off or
the drive system will not move freely. The controller will NOT operate the motor when the brake is disengaged.
When the lever is in the down position the brake is engaged. When the lever is in the up position, the brake is disengaged.
When you reset the brake system the unit will not operate until you toggle the power button off and back on. This process
will need to be repeated every time the brake in manually disengaged.
BRAKE
OVERRIDE LEVER
POWER MODE
(LEVER ENGAGED)
FREE WHEEL MODE
(LEVER DISENGAGED)
9
Advertisement
Table of Contents
Need help?
Do you have a question about the OVERLAND MEGA HERC and is the answer not in the manual?
Questions and answers