Plantronics ML18, ML20 Bluetooth Headset Manual

TAKE A GOOD LOOK

CALL BUTTON

• Take a call or end it (1 tap)
• Redial (2 taps)
• Initiate phone's voice-dialing (2 second press until tone is heard)
• Reconnect lost Bluetooth connection (1 tap if the headset doesn't automatically reconnect)
• Activate pairing mode after initial set up (press until LED flashes red/blue)

POWER SWITCH

• On (slide to reveal black)
• Off (slide to reveal red)

MICRO USB CHARGING PORT

• Charge:
  1 hour before first use
  2 hours (for full charge)
• Do not use headset while charging

VOLUME BUTTON

• Volume presets (1 tap per level change)

LED

• Charging (solid red)
• Low battery (3 red flashes at powering on)
• Pairing mode (repeating red/blue flashes)

Your headset may look slightly different than the illustration, but will still work as described.

Be safe! Please read the safety guide for important safety, charging, battery and regulatory information before using your new headset.

CONNECT TO YOUR PHONE

"Pairing" is the set-up process of introducing your headset to your phone. Before using your headset for the first time, you must pair it with your Bluetooth-enabled phone.

1. READY
   
   First time, right out of the box:
   Turn on the headset. The LED flashes red/blue to indicate pairing mode.
   Pair new phone:
   Turn on headset. Press call button until the LED flashes red/blue.
2. SET
   
   Activate the Bluetooth feature on your phone, then get phone to add/search/discover new Bluetooth devices.
   Phones have different menus to select from:
   iPhone: Settings > General > Bluetooth > On (starts the search for devices)
   Android™: Settings > Wireless & Networks > Bluetooth: On > Scan for devices.
3. CONNECT
   
   Select "PLT_ML18" or "PLT_ML20" from the list of Bluetooth devices shown on your phone.
   If phone asks for a passcode, enter four zeros (0000). You may see **** on screen.
   Some phones also ask to confirm headset connection after pairing.
   Headset LED will stop flashing red/ blue once your phone and headset are successfully paired/connected.
   You can now make a call using your phone's keypad or voice-dialing feature.

FIT EITHER EAR

TIPS

Stay near your phone

Bluetooth has a working "range" of up to 10 meters (33 feet) between the phone and headset before audio degrades and the connection is lost.

Know how to reconnect

Your headset tries to reconnect a lost connection. If it can't, then tap the Call button once or manually reconnect via the phone's Bluetooth device menu.

Listen to the voice (English only)

This headset automatically announces various status alerts, including:

• Power on/off
• Battery high, medium, low or recharge
• Pairing in process, successful or incomplete
• Connected or lost connection (to phone)

SPECIFICATIONS