Advertisement
Operation guide
1. Power on: you will hear a beep, and the timer indicator will display"--".
2. Press the bullon Lo open Lhe top lid, load Lhe object evenly inlo Lhe UV-C appliance
and close the top lid. Keep the top lid closed throughout the appliance's operation.
3. Press working mode button Lo choose Lhe appropriate working mode. See "Working
mode guide" below.
4. Once the routine is completed, open Lhe Lop lid, Lake object oul and unplug Lhe UV-C
appliance.
Working mode guide
Disinfect
Disinfect Function Button activates UV-C light
Gently press the "Disinfect" button, the timer
indicator will display "10" (10 min. duration by
default). Both the timer indicator and the
working mode button will flash 3 times, during
this period, press the "Disinfect" button again
to choose eilher "15" or "20" as 15rnin. or
20min. working duration. The flash will stop in
2 seconds, and the UV-C appliance will start
to work.
Dry
□
Dry Function
utton turns on the heater
Gently press the "Dry" button, the timer
indicator will display "30" (30 min. dry
duration by default). Both the timer indicator
and the working mode button will tlash 3
times during this period, press the "Dry"
button again to choose either "30" or "50" as
30rnin. or 50rnin. working duration. The flash
will stop in 2 seconds, and the UV-C appliance
will start to work.
IMPOH IAN I. DO NO I USI::: I HI:: DRY 1-UNC I ION
FOR ANY ELECTRONIC PRODUCTS. DOING SO
CAN RESULT IN DAMAGE.
Afler dry rouline, mind your hands when you
open the box due to the high temperature.
Allow the box to cool for several minutes prior to
removing the object placed inside.
Storage
Storage Function Button activates UV-C light for
20 minutes and thereafter 2 minutes every 2
hours for 72 hours.
Gently press the "Storage" button, the timer indicator
will display "20'" (20 min. duration by default).
In this mode, the UV-C appliance will operate
every 2 hours for 2 minutes after the initial 20
min. cycle is complete. The timer indicator will run
during the 2 hours periods and not during the 2
min.duration and will stop at"--" when the 72
hours maintenance routine is finished.
Dbinfcct+Dry
Disinfect+Dry Function
heater and then activates the UV-C light
Gently press the "Disintect+Dry" button, the
timer indicator will display "40" (30 min.
heater and 10 min. UV-C light duration by
default). Both the timer indicator and the
working mode button will flash 3 times,
during this period, press the "Disinfect
button lo choose either "40" or "60" as 40rnin.
or 60min. working duration(!J0rnin. heater
and l0min.UV-C light) The flash will stop in 2
seconds, and the appliance will start to work.
IMPORTANT: DO NOT USE THE DRY FUNCTION
FOR ANY ELECTRONIC PRODUCTS. DOING SO
CAN Hl:::SULI IN DAMAGI:::.
A[Lcr disinfcct+dry routine, rnind your hands when
you open the box due to the high temperature.
Allow the box to cool tor several minutes prior
to removing the object placed inside.
5
□
utton turns on the
Dry"
I
Advertisement
