Synesso ES.1 User Manual page 15

Figure 6. Home Screen
From the start screen, the ES.1 can be operated as a fully manual espresso machine, or run a saved program. To pull a manual
shot follow these instructions.
Figure 7. Brew Paddle
1. Press the paddle to the left to start the brewing process. The duration gauge will run the entire time continuously.
2. Press the paddle to the left advance through each brew process step: Pre-Infusion, Infusion, Ramp Down. Press the
paddle to the right at any time to stop the shot.
Note: Below are some general guidelines for the duration of each step in the brew process. The duration gauge
on the left side of the screen will not stop or restart when you advance to the next stage in the brew process.
3. Watch the touchscreen gauges as you progress through the brew process to keep track of duration, pressure and
temperature.
Table 14. Brew Process Screens
Step 1: Pre-Infusion (typically 3-5s) Step 2: Infusion (typically 15-25s
ES.1 User Manual | 4 - Getting Started With ES.1 | 17
Step 3: Ramp Down (typically 1-3s)