Buffalo LinkTheater LT-V100 Quick Setup Manual

LT-V100
Inserting batteries into the remote
1
Connecting the AC power cable
Connecting a Television
2
Analogue AV Connection (Standard De nition)
1
Connect the Video output port on the LinkTheater Media Player to
the video input port on your television using the composite video
cable (supplied).
2
Connect the Audio output port on the LinkTheater Media Player to
the audio input port on your television using the analogue audio
cable (supplied).
3
Select the appropriate TV input source.
AUDIO VIDEO
HDMI Connection (High De nition)
1
Connect the HDMI port on the LinkTheater Media Player to the
HDMI port on your TV using an HDMI cable (not supplied).
2
Select the appropriate TV input source.
HDMI
HDMI Cable ( * )
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Quick Setup Guide
Insert two batteries into the
remote.
Slide and lift the battery com-
partment lid, insert two batteries
with the correct polarity, and
close the lid.
A warning that batteries (battery
pack or batteries installed) shall
not be exposed to excessive heat
such as sunshine, re or the like.
1
Connect the power cable
to the LinkTheater Media
Player's DC connector.
2
Plug the opposite end
into an AC power outlet.
The LinkTheater Media
Player powers up automati-
cally.
Video(Yellow)
Audio(red/R)
Audio(white/L)
* not included in the package.
Connecting a USB storage device or net-
3
work
To connect a USB storage device
The LinkTheater Media Player has two USB ports that support
playback from USB external drives.
1
Transfer your favorite content on your computer to the USB
storage device in advance.
2
Connect the USB storage device to one of the LinkTheater
Media Player's USB ports.
3
Wait while the LinkTheater Media Player scans the USB stor-
age device for media les. (Scanning is enabled by default).
To connect to a network
Content on your computer can be played back on the LinkThe-
ater Media Player by connecting to your home network.
Connect the LAN port on the LinkTheater Media Player to the
network using a LAN cable (not supplied).
LinkStation ( * )
Flash ( * )
MiniStation ( * )
* not included in the package.
Welcome to the LinkTheater.
4
35011040 ver.02 2-01
TeraStation ( * )
DriveStation ( * )
For advanced settings and
more information, consult
the User Manual,located on
the included CD.