Advertisement
11. Refer to the diagram and insert the batteries into the
Smart Touch Control (included).
Check the location of the battery cover groove.
✎
The groove's location may vary depending on
the type of Smart Touch Control is provided
with the product.
Slightly lift the battery cover by pulling the strap or using a plastic card.
1
Insert 2 AAA batteries with the +/- polarities lined up correctly,
2
Control, and then press down along all the edges of the cover until it is completely attached.
12. Turning on the TV will display the initial setup screen. Press the
touch pad. A Bluetooth icon will appear at the bottom left of the
screen as shown side. The TV will then attempt to connect to the
Smart Touch Control automatically.
If you are using a cable box or satellite receiver, pair the TV with an IR Blaster. For more information about an IR Blaster,
✎
refer to the TV user manual.
Auto pairing will not work if the Smart Touch Control (included) has been paired before installing the Evolution Kit. In this
✎
case, pair the Smart Touch Control to the TV manually by pressing its pairing button. The pairing button can be accessed
by removing the Smart Touch Control's battery cover.
The Pre-Mounting Checklist
[
• Before snapping the Evolution Kit into place, ensure that the other end of the kit has been inserted securely into the two slots.
The kit may be damaged if you continue without securely positioning the kit inside the slots.
• If you are mounting the kit onto a wall-mounted TV, remove the TV from the wall first.
• Mounting an Evolution Kit that has been used on a different TV will reset the user data contained in the kit.
[SEK-1000]BN68-05216E-01L02.indb 5
2
1
place the battery cover on the back of the Smart Touch
3
English-5
3
2013-07-26
4:41:50
Advertisement
