Panasonic WJ-MPU955A User Manual page 72

Cameras are displayed in the list on the left by ID number, but can also be viewed by
logical number, control port, or video port. The grid on the right represents the
following:
First row = controller IDs 0-9, second row = controller IDs 10-19, etc.
Green blocks indicate an allowed permission, and white blocks indicate that permission is
denied.
2. Double-click on a specific controller to invert or alternate between permit or
deny
Be sure to click the save button (the picture of the floppy disk) before exiting
each particular permission tab to ensure the changes will be saved correctly.
The permission grid's dimensions are based on the maximum capacity for the
chosen CPU size, not on physically installed components already in the
database.
3. Highlight a row, a column, or click and hold the mouse button to highlight a
group of controllers
4. Click the Invert Grid Selection button to change the state of
5. Click on the Permit All button to turn the entire grid green –
6. Click on the Deny All button to turn the entire grid white –
7. Click on the Copy Grid button to copy the permission grid
Copying Cam Ctrl permissions to other cameras will also copy Cam
View permissions to the specified cameras.
A confirmation message will appear asking "Are you sure you want to COPY the Cam
Ctrl & Cam View permission for this Camera?" and explaining the copying rules:
[1] Permissions will be copied by Camera ID.
Configuration
the permission for the highlighted group, or
allowing all controllers permission to control the specified
camera, or
denying all controllers permission to control the specified
camera, or
from a specific camera to other cameras
68