Table of Contents
Advertisement
4.2.6
USING AN NFC TAG (REQUIRES THE OPTIONAL NFC MODULE – SEE CHAPTER 5.1)
All the models of DIVUS CIRCLE can be equipped with the NFC module. To open the door, you hold the NFC tag
near to the DIVUS CIRCLE and the tag is read. If it is associated with a user and that user is allowed to enter
according to the schedule, the DIVUS CIRCLE will give a green feedback (meaning access granted) and the
configured action will be executed (most probably opening a door or gate). Otherwise, the feedback will be red
(meaning access denied) and no action will be triggered. Also see chapter 4.5.
4.3
CLEANING (DIVUS CIRCLE ONLY)
When the glass needs to be cleaned, you can use a special function of the DIVUS CIRCLE which will avoid that
touching the screen triggers a call or another action. To activate the cleaning mode, first bring up the keypad
screen (see 4.2.4). From there, push the Screencleaner button.
After the timeout, if needed, push the Screencleaner button again or, if done, push the Exit button to return to
the normal dashboard screen.
4.4
PROGRAMMING A NEW NFC TAG
Your DIVUS CIRCLE, when ordered with the NFC module, will come with NFC cards which you can program,
assigning them to users. If you need to buy additional cards or prefer to use badges or other types of NFC devices,
please check that they use/support the MIFARE (Ultralight) / ISO 14443A standard with 13.56MHz. Other
standards are not supported. We recommend to test a card type before making orders of bigger quantities.
To program a new NFC tag:
1.
Access the DIVUS CIRCLE's Circle Settings section of the web interface and go to Access Control. Then
choose the user who shall have the tag assigned or create a new user.
2.
When you have the tag ready, push the small barcode icon next to the NFC tag input field:
When you push it, it will show a spinning arrows icon and the DIVUS CIRCLE will be in programming
mode. See chapter 4.5 for the device's visual feedback - depending on the model. (If you push the
spinning arrows, the NFC scan will be aborted.)
3.
Now hold the tag near to the device: for the DIVUS CIRCLE on the pulsating NFC icon, for the smaller
DIVUS CIRCLE small and small + at the right of the bell symbol, for the DIVUS CIRCLE / SQUARE small
C* in the centre below the bell button:
DIVUS CIRCLE user manual .
52
Advertisement
Table of Contents
